Overhead Crane Inspection Louisiana, MO
Overhead crane inspection Louisiana, MO. Due to the weight and overall size of the objects often being transported by overhead cranes, daily operation can lead to deterioration or, worse, a dangerous breakdown that puts you, your team, or your company at risk. This is precisely the reason why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not simply keep them operating at top efficiency, but also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Louisiana, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even an entire overhead crane brake rebuild, our primary objective since day one in 2004 has been to provide the best inspection services and equipment for your crane system that meets the most challenging manufacturing mandates in Louisiana, MO and throughout the Midwest.
Contact us online or call our staff at 866-756-1200 or 866-756-1202 for more information regarding overhead crane inspection and to get started on a quote, contact us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Louisiana, MO and Midwest Businesses By Engineered Lifting Systems
Our Louisiana, MO overhead crane company is experienced in performing many different kinds of crane services, such as comprehensive inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. Inspection frequency is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Louisiana, MO and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of limits and limit operation, wire ropes, drive components, mechanical couplings, and brakes
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
Along with being the overhead crane inspection company of choice in and around Louisiana, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Louisiana, MO and Throughout the Midwest
Frequent crane inspections performed monthly or as frequent as daily can help identify potential problems and address them before a costly accident occurs. The daily usage of your crane means normal wear and tear can eventually catch up and wreak havoc on the structure and components. Operational and visual inspections keep the crane in peak performance, which is where we come in!
Frequent inspection in Louisiana, MO and throughout the Midwest includes looking over the following components:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
- Functional operating mechanisms – Our Louisiana, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in tanks, lines, drain pumps, valves, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists ensure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and make sure that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Louisiana, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you neglect to meet these crane inspection requirements, not only will it affect your efficiency and reputation, it could lead to fines if OSHA performs an on-site audit. Give us a call today at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Louisiana, MO and Throughout the Midwest
Any updated, new, repaired, reinstalled, modified, or altered crane needs to be inspected to ensure compliance before the initial operation. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even operate the overhead crane.
These inspections should be performed by qualified representatives in accordance with OEM recommendations to ensure that all parts of the system have been installed properly and functionally tested. These trained technicians need to provide a written report of the findings. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Reach out to us right away or call us at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Louisiana, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Louisiana, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your overhead crane today. Once we are finished, you can get back at it with the peace of mind knowing your system meets government standards and your crew is safe to do what they do best. An overhead crane at a standstill puts an abrupt halt to your worksite, along with your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing Louisiana, MO and Midwest businesses with OSHA-compliant crane services of any type, since that first day back in 2004. To get started on a quote for overhead crane inspection, reach out to us or give our experienced specialists a call right now at 866-756-1200 or 866-756-1202.