Overhead Crane Inspection House Springs, MO
Overhead crane inspection House Springs, MO. Because of the size and weight of the objects often being lifted by overhead cranes, daily operation can lead to deterioration or, worse, a dangerous breakdown that puts you, your team, or your company at risk. This is precisely the reason why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not only keep them working at top efficiency, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your House Springs, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even an entire overhead crane brake rebuild, our main objective since that first day in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most demanding manufacturing mandates in House Springs, MO and throughout the Midwest.
Reach out to us online or call our team at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection and to get started on a quote, contact us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For House Springs, MO and Midwest Businesses By Engineered Lifting Systems
Our House Springs, MO overhead crane company is specialized in performing all types of crane services, such as full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry standards. The frequency of inspection is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in House Springs, MO and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of brakes, drive components, mechanical couplings, wire ropes, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues, hazards, or opportunities for improvement
Overhead Crane Inspection Checklist | Frequent Inspections in House Springs, MO and Throughout the Midwest
Frequent crane inspections performed monthly or as frequent as daily can help identify potential problems and address them before a costly accident occurs. Over time, normal wear and tear can eventually catch up and damage the components and structure. Visual and operational inspections keep the crane in optimal performance, which is where our technicians excel!
Frequent inspection in House Springs, MO and throughout the Midwest includes examining the following list of items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
- Functional operating mechanisms – Our House Springs, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in tanks, lines, drain pumps, valves, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists ensure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and check that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in House Springs, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These regulations for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Wind, load, and other indicators over their full range
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Corroded, cracked, or deformed members
If you fail to do these crane inspection requirements, not only will it affect your efficiency and reputation, it could lead to fines if OSHA were to perform a sudden, on-site audit. Call us today at 866-756-1200 or 866-756-1202 or contact us online.
Initial Overhead Crane Inspections For New Equipment in House Springs, MO and Throughout the Midwest
Any modified, repaired, reinstalled, altered, new, or updated crane needs to be inspected to ensure compliance prior to the first use. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even operate the crane system.
These inspections should be performed by certified representatives in accordance with OEM recommendations to ensure that all working components have been installed properly and functionally tested. These trained technicians must provide a written report of the findings. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Reach out to us today or call us at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the House Springs, MO area or elsewhere throughout the Midwest.
Reach Out To the Leading Overhead Crane Inspectors in House Springs, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your system now. Once we complete the inspection, you can get back to work with the peace of mind knowing your system is up to government regulations and your team is safe to do what they do best. An inoperable overhead crane puts a costly halt to your project, along with your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing House Springs, MO and Midwest businesses with OSHA-compliant crane services of all kinds. To get started on a quote for overhead crane inspection, contact us or give our experienced specialists a call right now at 866-756-1200 or 866-756-1202.