Overhead Crane Inspection Palmyra, MO
Overhead crane inspection Palmyra, MO. Because of the size and weight of the objects often being transported by overhead cranes, daily operation can lead to deterioration or, worse, a dangerous failure that puts your employees, your company, and your processes at risk. This is exactly the reason frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not just keep them operating at peak performance, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Palmyra, MO overhead crane system. From initial consultation to inspection, maintenance, and repair services, or perhaps even an entire overhead crane brake rebuild, our main objective since day one in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most demanding manufacturing mandates in Palmyra, MO and throughout the Midwest.
For more information regarding overhead crane inspection or to get started on a quote, reach out to us online or call our team at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Palmyra, MO and Midwest Businesses By Engineered Lifting Systems
Our Palmyra, MO overhead crane company is specialized in performing many different kinds of crane services, including comprehensive inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. Inspection frequency is based on service, environmental, and application factors. Our inspectors on staff are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Palmyra, MO and throughout the Midwest include:
- Frequent Inspections (daily or monthly)
- Periodic Inspections (monthly or annually)
- Initial Crane Inspections
- Written or electronic inspection report for your records
- A review of existing inspection and training records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues, hazards, or opportunities for improvement
Overhead Crane Inspection Checklist | Frequent Inspections in Palmyra, MO and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. Over time, normal wear and tear can eventually catch up and damage the structure and components. Operational and visual inspections keep the crane in optimal operating condition, which is where our technicians excel!
Frequent inspections in Palmyra, MO and throughout the Midwest include checking the following components:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
- Hoist chains and end connections – Our specialists look for stretch beyond manufacturer’s recommendations, twists, distorted links interfering with proper function, or excessive wear. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Palmyra, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for cracks, deformation, etc.
- Braking motions – Our specialists ensure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and check that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Palmyra, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you fail to do these crane inspection requisites, not only will it affect your efficiency and reputation, it could lead to costly fines if OSHA performs a sudden, on-site audit. Give us a call now at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Palmyra, MO and Throughout the Midwest
Any modified, repaired, reinstalled, altered, new, or updated crane needs to be inspected to ensure compliance prior to the initial operation. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you are able to even use the overhead crane.
These inspections should be performed by qualified representatives in accordance with OEM recommendations to make sure all working components have been installed properly and functionally tested. These trained technicians must provide a written report of the results. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in place. Reach out to us right away or call us at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Palmyra, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Palmyra, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your system today. Once we are finished, you can get back to work with the peace of mind knowing your machine is up to government regulations and your team is safe to do what they do best. An inoperable overhead crane puts an abrupt halt to your project, along with your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing Palmyra, MO and Midwest companies with OSHA-compliant crane services of any type, since that first day in 2004. To get started on a quote for overhead crane inspection, contact us or call our experienced specialists right away at 866-756-1200 or 866-756-1202.