Overhead Crane Inspection St. Louis, MO
Overhead crane inspection St. Louis, MO. Because of the weight and overall size of the objects often being lifted by overhead cranes, daily operation can lead to deterioration or, worse, a dangerous failure that puts your employees, your company, and your processes at risk. Which is precisely why frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not just keep them operating at top efficiency, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your St. Louis, MO overhead crane system. From initial consultation to inspection, maintenance, and repair services, or perhaps even an entire overhead crane brake rebuild, our primary objective since day one in 2004 has been to provide the best inspection services and equipment for your crane system that meets the most challenging manufacturing mandates in St. Louis, MO and throughout the Midwest.
Reach out to us online or call our staff at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection or to get started on a quote, reach out to us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For St. Louis, MO and Midwest Businesses By Engineered Lifting Systems
Our St. Louis, MO overhead crane company is experienced in performing many different kinds of crane services, such as full inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. The frequency of inspection is based on service, environmental, and application factors. Our inspectors on staff are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in St. Louis, MO and throughout the Midwest include:
- Initial Crane Inspections
- Periodic Inspections (monthly to annually)
- Frequent Inspections (daily to monthly)
- A review of existing training and inspection records
- Electronic or written inspection report for your records
- Detailed inspection of brakes, drive components, mechanical couplings, wire ropes, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around St. Louis, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- NORD Flexbloc Parts
- NORD Flexbloc
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
- Chain Hoist Parts
Overhead Crane Inspection Checklist | Frequent Inspections in St. Louis, MO and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and damage the structure and components. Operational and visual inspections keep the crane in peak performance, which is where our technicians excel!
Frequent inspection in St. Louis, MO and throughout the Midwest includes looking over the following components:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our St. Louis, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for cracks, deformation, etc.
- Braking motions – Our specialists make sure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in St. Louis, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These standards for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Corroded, cracked, or deformed members
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Wind, load, and other indicators over their full range
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
If you neglect to do these crane inspection requisites, not only will your efficiency suffer, it could lead to fines if OSHA were to perform an on-site audit. Give us a call right away at 866-756-1200 or 866-756-1202 or contact us online.
Initial Overhead Crane Inspections For New Equipment in St. Louis, MO and Throughout the Midwest
Any modified, repaired, reinstalled, altered, new, or updated crane should be inspected to ensure compliance before the initial operation. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you can even operate the overhead crane.
These inspections should be performed by certified representatives in accordance with OEM recommendations to make sure all parts of the system have been installed properly and functionally tested. These trained technicians need to provide a full report of the findings. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Reach out to us right away or call us at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the St. Louis, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in St. Louis, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your overhead crane now. Once we complete the inspection, you can get back to work with the peace of mind knowing your machine meets government standards and your crew is safe to do what they do best. An inoperable overhead crane puts an abrupt halt to your project, as well as your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing St. Louis, MO and Midwest businesses with OSHA-compliant crane services of any type, since that first day in 2004. To get begin a quote for overhead crane inspection, reach out to us or call our experienced specialists right away at 866-756-1200 or 866-756-1202.