Overhead Crane Inspection Pike County, MO
Overhead crane inspection Pike County, MO. Because of the size and weight of the objects that are lifted by overhead cranes, daily usage can lead to decline or, worse, a dangerous breakdown that puts you, your team, or your company at risk. Which is precisely the reason why frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not simply keep them working at top efficiency, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Pike County, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even a complete overhead crane brake rebuild, our primary goal since day one in 2004 has been to provide the right inspection services and equipment for your overhead crane system that meets the most rigorous manufacturing requirements in Pike County, MO and throughout the Midwest.
Overhead Crane Inspection Services For Pike County, MO and Midwest Businesses By Engineered Lifting Systems
Our Pike County, MO overhead crane company is experienced in performing all types of crane services, including full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry regulations. Inspection frequency is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Pike County, MO and throughout the Midwest include:
- Initial Crane Inspections
- Periodic Inspections (monthly to annually)
- Frequent Inspections (daily to monthly)
- A review of existing training and inspection records
- Electronic or written inspection report for your records
- Detailed inspection of brakes, drive components, mechanical couplings, wire ropes, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around Pike County, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Pike County, MO and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. Over time, normal wear and tear can eventually catch up and wreak havoc on the structure and components. Visual and operational inspections keep the crane in optimal operating condition, which is where we come in!
Frequent inspection in Pike County, MO and throughout the Midwest includes checking the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for any damage or deformation to the rope structure, fraying, loss of lubricant, broken strands, kinks, etc.
- Hoist chains and end connections – Our specialists look for stretch beyond manufacturer’s recommendations, twists, distorted links interfering with proper function, or excessive wear. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Pike County, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists ensure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and make sure that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Pike County, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These standards for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Wind, load, and other indicators over their full range
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Corroded, cracked, or deformed members
If you neglect to meet these crane inspection requisites, not only will it affect your efficiency and reputation, it could lead to fines if OSHA performs a sudden, on-site audit. Call us right away at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in Pike County, MO and Throughout the Midwest
Any updated, new, repaired, reinstalled, modified, or altered crane needs to be inspected to ensure compliance prior to the initial operation. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you are able to even use the overhead crane.
These inspections should be performed by experienced representatives in accordance with OEM recommendations to ensure that all working components have been tested and properly installed. These trained technicians need to provide a full report of the findings. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Reach out to us right away or call us at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Pike County, MO area or elsewhere throughout the Midwest.
Reach Out To the Leading Overhead Crane Inspectors in Pike County, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your system now. Once we are finished, you can get back at it with the peace of mind knowing your machine meets government regulations and your crew is safe to do what they do best. An inoperable overhead crane puts a costly halt to your worksite, along with your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Pike County, MO and Midwest companies with OSHA-compliant crane services of any type. To get begin a quote for overhead crane inspection, reach out to us or give our experienced specialists a call today at 866-756-1200 or 866-756-1202.