Overhead Crane Inspection Jefferson County, IL
Overhead crane inspection Jefferson County, IL. Because of the size and weight of the objects that are transported by overhead cranes, daily operation can lead to degradation or, worse, a dangerous failure that puts you, your team, or your company at risk. Which is exactly why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not simply keep them operating at top efficiency, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Jefferson County, IL overhead crane system. From initial consultation to inspection, repair services, and maintenance, or even a complete overhead crane brake rebuild, our main objective since that first day in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most demanding manufacturing mandates in Jefferson County, IL and throughout the Midwest.
Overhead Crane Inspection Services For Jefferson County, IL and Midwest Businesses By Engineered Lifting Systems
Our Jefferson County, IL overhead crane company is experienced in performing many different kinds of crane services, including comprehensive inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry regulations. Inspection frequency is based on service, environmental, and application factors. Our inspectors on staff are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Jefferson County, IL and throughout the Midwest include:
- Initial Crane Inspections
- Periodic Inspections (monthly to annually)
- Frequent Inspections (daily to monthly)
- A review of existing training and inspection records
- Electronic or written inspection report for your records
- Detailed inspection of limits and limit operation, wire ropes, drive components, mechanical couplings, and brakes
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around Jefferson County, IL and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Jefferson County, IL and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and damage the components and structure. Visual and operational inspections keep the crane in peak operating condition, which is where we come in!
Frequent inspection in Jefferson County, IL and throughout the Midwest includes looking over the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
- Hoist chains and end connections – Our specialists look for stretch beyond manufacturer’s recommendations, twists, distorted links interfering with proper function, or excessive wear. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Jefferson County, IL and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for cracks, deformation, etc.
- Braking motions – Our specialists ensure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and check that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Jefferson County, IL and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you neglect to meet these crane inspection requisites, not only will your efficiency suffer, it could lead to fines if OSHA were to perform an on-site audit. Give us a call today at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in Jefferson County, IL and Throughout the Midwest
Any modified, repaired, reinstalled, altered, new, or updated crane should be inspected to ensure compliance before the first use. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even use the crane system.
These inspections should be performed by experienced representatives in accordance with OEM recommendations to ensure that all working components have been tested and properly installed. These trained technicians need to provide a written report on the findings. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in place. Reach out to us now or give us a call at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Jefferson County, IL area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Jefferson County, IL, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your overhead crane today. Once we complete the inspection, you can get back at it with the peace of mind knowing your machine is up to government regulations and your crew is safe to do what they do best. An inoperable overhead crane puts an abrupt halt to your project, along with your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Jefferson County, IL and Midwest companies with OSHA-compliant crane services of all kinds. To get started on a quote for overhead crane inspection, contact us or call our experienced specialists right now at 866-756-1200 or 866-756-1202.