Overhead Crane Inspection Mexico, MO
Overhead crane inspection Mexico, MO. Due to the size and weight of the objects often being transported by overhead cranes, daily operation can lead to decline or, worse, a dangerous breakdown that puts your employees, your company, and your processes at risk. This is precisely why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not only keep them operating at peak performance, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Mexico, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even an entire overhead crane brake rebuild, our main objective since day one in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most challenging manufacturing requirements in Mexico, MO and throughout the Midwest.
For more information regarding overhead crane inspection or to get started on a quote, contact us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Mexico, MO and Midwest Businesses By Engineered Lifting Systems
Our Mexico, MO overhead crane company is specialized in performing many different kinds of crane services, such as full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry standards. Inspection frequency is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Mexico, MO and throughout the Midwest include:
- Initial Crane Inspections
- Periodic Inspections (monthly to annually)
- Frequent Inspections (daily to monthly)
- A review of existing training and inspection records
- Electronic or written inspection report for your records
- Detailed inspection of limits and limit operation, wire ropes, drive components, mechanical couplings, and brakes
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
Overhead Crane Inspection Checklist | Frequent Inspections in Mexico, MO and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. Over time, normal wear and tear can eventually catch up and damage the components and structure. Operational and visual inspections keep the crane in optimal performance, which is where we come in!
Frequent inspection in Mexico, MO and throughout the Midwest includes examining the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
- Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Mexico, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in drain pumps, lines, valves, tanks, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists ensure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and make sure that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Mexico, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These standards for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Corroded, cracked, or deformed members
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Wind, load, and other indicators over their full range
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
If you neglect to do these crane inspection requisites, not only will it affect your efficiency and reputation, it could lead to fines if OSHA performs an on-site audit. Call us right away at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in Mexico, MO and Throughout the Midwest
Any updated, new, repaired, reinstalled, modified, or altered crane should be inspected to ensure compliance before the first use. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you are able to even use the crane system.
These inspections should be performed by qualified representatives in accordance with OEM recommendations to make sure all parts of the system have been installed properly and functionally tested. These trained technicians need to provide a full report of the findings. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Contact us now or call us at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Mexico, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Mexico, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your system today. Once we complete the inspection, you can get back to work with the peace of mind knowing your system is up to government regulations and your team is safe to do what they do best. An inoperable overhead crane puts a costly halt to your project, as well as your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing Mexico, MO and Midwest businesses with OSHA-compliant crane services of any type, since that first day in 2004. To get begin a quote for overhead crane inspection, contact us or give our experienced specialists a call right away at 866-756-1200 or 866-756-1202.