Overhead Crane Inspection Rails County, MO
Overhead crane inspection Rails County, MO. Because of the weight and overall size of the objects that are lifted by overhead cranes, daily operation can lead to deterioration or, worse, a dangerous breakdown that puts your employees, your company, and your processes at risk. Which is precisely the reason periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not just keep them working at peak performance, but to also keep your staff safe, reduce costly downtime, and extend the life of your equipment.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Rails County, MO overhead crane system. From initial consultation to inspection, maintenance, and repair services, or perhaps even a complete overhead crane brake rebuild, our main objective since that first day in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most demanding manufacturing requirements in Rails County, MO and throughout the Midwest.
For more information regarding overhead crane inspection and to get started on a quote, contact us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Rails County, MO and Midwest Businesses By Engineered Lifting Systems
Our Rails County, MO overhead crane company is experienced in performing a variety of crane services, such as comprehensive inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. The frequency of inspection is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Rails County, MO and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
Along with being the overhead crane inspection company of choice in and around Rails County, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Rails County, MO and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. Over time, normal wear and tear can eventually catch up and damage the components and structure. Visual and operational inspections keep the crane in optimal operating condition, which is where our technicians excel!
Frequent inspection in Rails County, MO and throughout the Midwest includes examining the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Rails County, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists make sure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and make sure that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Rails County, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Wind, load, and other indicators over their full range
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Corroded, cracked, or deformed members
If you fail to do these crane inspection requirements, not only will it affect your efficiency and reputation, it could lead to fines if OSHA were to perform an on-site audit. Give us a call right away at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in Rails County, MO and Throughout the Midwest
Any new, reinstalled, modified, altered, repaired, or updated crane needs to be inspected to ensure compliance prior to the first use. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even operate the overhead crane.
These inspections should be performed by certified representatives in accordance with OEM recommendations to ensure that all parts of the system have been installed properly and functionally tested. These trained technicians must provide a full report of the results. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Reach out to us now or give us a call at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Rails County, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Rails County, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your system now. Once we complete the inspection, you can get back to work with the peace of mind knowing your overhead crane meets government regulations and your crew is safe to do what they do best. An inoperable overhead crane puts a costly halt to your worksite, as well as your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Rails County, MO and Midwest businesses with OSHA-compliant crane services of any type. To get started on a quote for overhead crane inspection, reach out to us or call our experienced specialists today at 866-756-1200 or 866-756-1202.