Overhead Crane Inspection Cedar Valley, IA
Overhead crane inspection Cedar Valley, IA. Because of the weight and overall size of the objects often being transported by overhead cranes, daily operation can lead to degradation or, worse, a dangerous failure that puts your employees, your company, and your processes at risk. This is exactly the reason why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not just keep them working at top efficiency, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Cedar Valley, IA overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even an entire overhead crane brake rebuild, our primary goal since day one in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most demanding manufacturing mandates in Cedar Valley, IA and throughout the Midwest.
Contact us online or call our staff at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection or to get started on a quote, reach out to us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Cedar Valley, IA and Midwest Businesses By Engineered Lifting Systems
Our Cedar Valley, IA overhead crane company is specialized in performing many different kinds of crane services, such as comprehensive inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry standards. The frequency of inspection is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Cedar Valley, IA and throughout the Midwest include:
- Frequent Inspections (daily or monthly)
- Periodic Inspections (monthly or annually)
- Initial Crane Inspections
- Written or electronic inspection report for your records
- A review of existing inspection and training records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues, hazards, or opportunities for improvement
Overhead Crane Inspection Checklist | Frequent Inspections in Cedar Valley, IA and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and damage the components and structure. Operational and visual inspections keep the crane in peak operating condition, which is where we come in!
Frequent inspections in Cedar Valley, IA and throughout the Midwest include looking over the following components:
- Wire ropes – The Engineered Lifting Systems professionals look for any damage or deformation to the rope structure, fraying, loss of lubricant, broken strands, kinks, etc.
- Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
- Functional operating mechanisms – Our Cedar Valley, IA and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in drain pumps, lines, valves, tanks, etc.
- Hooks – We look for cracks, deformation, etc.
- Braking motions – Our specialists ensure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working condition according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Cedar Valley, IA and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you neglect to meet these crane inspection requirements, not only will your efficiency suffer, it could lead to fines if OSHA were to perform a sudden, on-site audit. Call us today at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Cedar Valley, IA and Throughout the Midwest
Any new, reinstalled, modified, altered, repaired, or updated crane should be inspected to ensure compliance prior to the initial operation. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you are able to even operate the crane system.
These inspections should be performed by certified representatives in accordance with OEM recommendations to make sure all parts of the system have been tested and properly installed. These trained technicians need to provide a written report of the results. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Contact us now or call us at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Cedar Valley, IA area or elsewhere throughout the Midwest.
Reach Out To the Leading Overhead Crane Inspectors in Cedar Valley, IA, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your overhead crane now. Once we are finished, you can get back to work with the peace of mind knowing your system is up to government regulations and your team is safe to do what they do best. An overhead crane at a standstill puts a costly halt to your project, along with your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Cedar Valley, IA and Midwest companies with OSHA-compliant crane services of all kinds. To get started on a quote for overhead crane inspection, reach out to us or give our experienced specialists a call right away at 866-756-1200 or 866-756-1202.