Evansville, IN

Overhead Crane Inspection Evansville, IN

Overhead crane inspection Evansville, IN. Because of the weight and overall size of the objects often being lifted by overhead cranes, daily usage can lead to deterioration or, worse, a dangerous deficiency that puts you, your team, or your company at risk. This is exactly the reason why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not only keep them working at top efficiency, but also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.

Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Evansville, IN overhead crane system. From initial consultation to inspection, maintenance, and repair services, or even an entire overhead crane brake rebuild, our primary objective since that first day in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most challenging manufacturing mandates in Evansville, IN and throughout the Midwest.

Reach out to us online or call our team at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection and to get started on a quote, reach out to us online or call our staff at 866-756-1200 or 866-756-1202.

Overhead Crane Inspection Services For Evansville, IN and Midwest Businesses By Engineered Lifting Systems

Our Evansville, IN overhead crane company is specialized in performing many different kinds of crane services, including comprehensive inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry regulations. Inspection frequency is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:

• Occupational Safety and Health Administration (OSHA)
• American Society of Mechanical Engineers (ASME)
• Construction Management Association of America (CMAA)

Overhead crane inspection services offered by Engineered Lifting Systems in Evansville, IN and throughout the Midwest include:

In addition to being the overhead crane inspection company of choice in and around Evansville, IN and throughout the Midwest, Engineered Lifting Systems also provides the following:

• Overhead Crane Repair
• Overhead Crane Brakes

Overhead Crane Inspection Checklist | Frequent Inspections in Evansville, IN and Throughout the Midwest

Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. Over time, normal wear and tear can eventually catch up and wreak havoc on the structure and components. Visual and operational inspections keep the crane in optimal performance, which is where our technicians excel!

Frequent inspection in Evansville, IN and throughout the Midwest includes checking the following items:

• Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
• Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
• Functional operating mechanisms – Our Evansville, IN and Midwest specialists look for maladjustment.
• Air or hydraulic systems – We check for deterioration or leakage in tanks, lines, drain pumps, valves, etc.
• Hooks – We look for cracks, deformation, etc.
• Braking motions – Our specialists make sure that stopping distance is normal and that there is not excessive drift.
• Hoist trolley and bridge – We run through complete motions.
• Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
• Safety – Our specialists test safety devices and check that warning and other safety labels are apparent and legible.

OSHA Annual Overhead Crane Inspection | Periodic Inspections in Evansville, IN and Throughout the Midwest

Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These standards for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.

According to OSHA, periodic inspections include checking the following items:

• Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
• Loose rivets or bolts
• Worn or cracked drums and sheaves
• Wind, load, and other indicators over their full range
• Excessive wear on ratchets, pawls, linings, and brake system parts
• Excessive chain stretch or wear on chain drive sprockets
• Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
• Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
• Corroded, cracked, or deformed members

If you fail to do these crane inspection requisites, not only will it affect your efficiency and reputation, it could lead to costly fines if OSHA performs an on-site audit. Call us now at 866-756-1200 or 866-756-1202 or connect with us online.

Initial Overhead Crane Inspections For New Equipment in Evansville, IN and Throughout the Midwest

Any updated, new, repaired, reinstalled, modified, or altered crane is required to be inspected to ensure compliance prior to the initial operation. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you are able to even use the crane system.

These inspections should be performed by certified representatives in accordance with OEM recommendations to ensure that all parts of the system have been tested and properly installed. These trained technicians must provide a written report on the results. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in place. Reach out to us right away or give us a call at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Evansville, IN area or elsewhere throughout the Midwest.

Reach Out To the Leading Overhead Crane Inspectors in Evansville, IN, Throughout the Midwest | Engineered Lifting Systems

Let our overhead crane inspectors check out your system today. Once we are finished, you can get back at it with the peace of mind knowing your system is up to government standards and your crew is safe to do what they do best. An overhead crane at a standstill puts an abrupt halt to your project, as well as your deadline and your bottom line. Nobody wants that to happen.

Engineered Lifting Systems has been providing Evansville, IN and Midwest companies with OSHA-compliant crane services of any type, since that first day in 2004. To get begin a quote for overhead crane inspection, contact us or give our experienced specialists a call today at 866-756-1200 or 866-756-1202.