Overhead Crane Inspection Nashville, IL

Overhead crane inspection Nashville, IL. Because of the size and weight of the objects often being lifted by overhead cranes, daily operation can lead to deterioration or, worse, a dangerous failure that puts you, your team, or your company at risk. This is precisely the reason frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not simply keep them operating at top efficiency, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.

Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Nashville, IL overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even a complete overhead crane brake rebuild, our primary goal since day one in 2004 has been to provide the best inspection services and equipment for your crane system that meets the most rigorous manufacturing standards in Nashville, IL and throughout the Midwest.

For more information regarding overhead crane inspection and to get started on a quote, reach out to us online or call our team at 866-756-1200 or 866-756-1202.

 


Overhead Crane Inspection Nashville, IL | Midwest Crane Equipment Near Nashville, IL | Engineered Lifting Systems

Overhead Crane Inspection Services For Nashville, IL and Midwest Businesses By Engineered Lifting Systems

Our Nashville, IL overhead crane company is experienced in performing a variety of crane services, including comprehensive inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry standards. The frequency of inspection is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:

Overhead crane inspection services performed by Engineered Lifting Systems in Nashville, IL and throughout the Midwest include:

  • Initial Crane Inspections
  • Periodic Inspections (monthly to annually)
  • Frequent Inspections (daily to monthly)
  • A review of existing training and inspection records
  • Electronic or written inspection report for your records
  • Detailed inspection of brakes, drive components, mechanical couplings, wire ropes, limits and limit operation
  • Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement


Along with being the overhead crane inspection company of choice in and around Nashville, IL and throughout the Midwest, Engineered Lifting Systems also provides the following:

Overhead Crane Inspection Checklist | Frequent Inspections in Nashville, IL and Throughout the Midwest

Frequent crane inspections performed monthly or as often as daily can help identify potential problems and address them before a costly accident occurs. The daily usage of your crane means normal wear and tear can eventually catch up and damage the components and structure. Visual and operational inspections keep the crane in peak operating condition, which is where our technicians excel!

Frequent inspection in Nashville, IL and throughout the Midwest includes examining the following list of items:

  • Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
  • Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
  • Functional operating mechanisms – Our Nashville, IL and Midwest specialists look for maladjustment.
  • Air or hydraulic systems – We check for deterioration or leakage in tanks, lines, drain pumps, valves, etc.
  • Hooks – We look for cracks, deformation, etc.
  • Braking motions – Our specialists ensure that stopping distance is normal and that there is not excessive drift.
  • Hoist trolley and bridge – We run through complete motions.
  • Rope reeving – We ensure it is in working condition according to manufacturers’ recommendations.
  • Safety – Our specialists test safety components and check that warning and other safety labels are present and legible.

OSHA Annual Overhead Crane Inspection | Periodic Inspections in Nashville, IL and Throughout the Midwest

Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.

According to OSHA, periodic inspections include checking the following items:

  • Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
  • Loose rivets or bolts
  • Worn or cracked drums and sheaves
  • Wind, load, and other indicators over their full range
  • Excessive wear on ratchets, pawls, linings, and brake system parts
  • Excessive chain stretch or wear on chain drive sprockets
  • Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
  • Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
  • Corroded, cracked, or deformed members

If you fail to do these crane inspection requirements, not only will it affect your efficiency and reputation, it could lead to costly fines if OSHA were to perform a sudden, on-site audit. Give us a call right away at 866-756-1200 or 866-756-1202 or connect with us online.


Overhead Crane Inspection Nashville, IL | Midwest Crane Inspection in Nashville, IL | Engineered Lifting Systems

Initial Overhead Crane Inspections For New Equipment in Nashville, IL and Throughout the Midwest

Any modified, repaired, reinstalled, altered, new, or updated crane is required to be inspected to ensure compliance prior to the initial operation. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you can even use the crane system.

These inspections should be performed by certified representatives in accordance with OEM recommendations to ensure that all working components have been installed properly and functionally tested. These trained technicians need to provide a full report on the results. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Reach out to us today or give us a call at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Nashville, IL area or elsewhere throughout the Midwest.


Contact the Leading Overhead Crane Inspectors in Nashville, IL, Throughout the Midwest | Engineered Lifting Systems

Let our overhead crane inspectors take a look at your overhead crane now. Once we complete the inspection, you can get back at it with the peace of mind knowing your machine is up to government standards and your team is safe to do what they do best. An overhead crane at a standstill puts a costly halt to your project, as well as your deadline and your bottom line. Nobody wants that to happen.

Since that first day in 2004, we have been providing Nashville, IL and Midwest businesses with OSHA-compliant crane services of any type. To get begin a quote for overhead crane inspection, reach out to us or give our experienced specialists a call right now at 866-756-1200 or 866-756-1202.

Locations

Swing into action with superior solutions in lifting equipment.

Ready to hit the ground running with a new site or get your current equipment back up and running at maximum capacity as soon as possible? You need a reliable partner for your operation's crane and other overhead lifting system needs: a one-stop shop for everything from design and installation to inspections and repairs.

Reap the benefits of working with one of the top overhead crane technical teams in the world when you work with us. Receive personalized support as we help you find the right products and services for your crane and hoist needs, including jib cranes, bridge cranes, freestanding structures, rope hoists, chain hoists and more. It's time to make your move and leave your project in the hands of our experts.

Get a Quote