Overhead Crane Inspection Benton County, AR
Overhead crane inspection Benton County, AR. Due to the weight and overall size of the objects that are lifted by overhead cranes, daily operation can lead to degradation or, worse, a dangerous deficiency that puts you, your team, or your company at risk. This is exactly why frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not just keep them operating at peak performance, but also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Benton County, AR overhead crane system. From initial consultation to inspection, maintenance, and repair services, or perhaps even an entire overhead crane brake rebuild, our primary goal since day one in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most rigorous manufacturing standards in Benton County, AR and throughout the Midwest.
Reach out to us online or call our staff at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection and to get started on a quote, reach out to us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Benton County, AR and Midwest Businesses By Engineered Lifting Systems
Our Benton County, AR overhead crane company is specialized in performing a variety of crane services, such as comprehensive inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. The frequency of inspection is based on application, environmental, and service factors. Our inspectors on staff are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Benton County, AR and throughout the Midwest include:
- Frequent Inspections (daily or monthly)
- Periodic Inspections (monthly or annually)
- Initial Crane Inspections
- Written or electronic inspection report for your records
- A review of existing inspection and training records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
Along with being the overhead crane inspection company of choice in and around Benton County, AR and throughout the Midwest, Engineered Lifting Systems also provides the following:
Overhead Crane Inspection Checklist | Frequent Inspections in Benton County, AR and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and damage the structure and components. Visual and operational inspections keep the crane in peak operating condition, which is where our technicians excel!
Frequent inspections in Benton County, AR and throughout the Midwest include looking over the following list of items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Benton County, AR and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in drain pumps, lines, valves, tanks, etc.
- Hooks – We look for cracks, deformation, etc.
- Braking motions – Our specialists make sure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Benton County, AR and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These standards for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Corroded, cracked, or deformed members
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Wind, load, and other indicators over their full range
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
If you fail to meet these crane inspection requisites, not only will it affect your efficiency and reputation, it could lead to fines if OSHA were to perform a sudden, on-site audit. Call us right away at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Benton County, AR and Throughout the Midwest
Any modified, repaired, reinstalled, altered, new, or updated crane is required to be inspected to ensure compliance before the initial operation. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you can even operate the overhead crane.
These inspections should be performed by qualified representatives in accordance with OEM recommendations to make sure all parts of the system have been installed properly and functionally tested. These trained technicians must provide a written report of the results. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Contact us today or give us a call at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Benton County, AR area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Benton County, AR, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your overhead crane today. Once we complete the inspection, you can get back to work with the peace of mind knowing your overhead crane is up to government standards and your crew is safe to do what they do best. An overhead crane at a standstill puts an abrupt halt to your worksite, along with your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing Benton County, AR and Midwest businesses with OSHA-compliant crane services of all kinds, since that first day back in 2004. To get started on a quote for overhead crane inspection, contact us or call our experienced specialists right away at 866-756-1200 or 866-756-1202.