Vandalia, MO

Overhead Crane Inspection Vandalia, MO

Overhead crane inspection Vandalia, MO. Due to the weight and overall size of the objects often being lifted by overhead cranes, daily usage can lead to degradation or, worse, a dangerous failure that puts you, your team, or your company at risk. This is precisely the reason periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not only keep them working at top efficiency, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.

Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Vandalia, MO overhead crane system. From initial consultation to inspection, maintenance, and repair services, or even a complete overhead crane brake rebuild, our primary goal since that first day in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most rigorous manufacturing requirements in Vandalia, MO and throughout the Midwest.

Contact us online or call our team at 866-756-1200 or 866-756-1202 for more information regarding overhead crane inspection and to get started on a quote, contact us online or call our team at 866-756-1200 or 866-756-1202.

Overhead Crane Inspection Services For Vandalia, MO and Midwest Businesses By Engineered Lifting Systems

Our Vandalia, MO overhead crane company is specialized in performing a variety of crane services, such as full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry standards. The frequency of inspection is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following standards:

• Occupational Safety and Health Administration (OSHA)
• American Society of Mechanical Engineers (ASME)
• Construction Management Association of America (CMAA)

Overhead crane inspection services offered by Engineered Lifting Systems in Vandalia, MO and throughout the Midwest include:

Along with being the overhead crane inspection company of choice in and around Vandalia, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:

• Overhead Crane Repair
• Overhead Crane Brakes

Overhead Crane Inspection Checklist | Frequent Inspections in Vandalia, MO and Throughout the Midwest

Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. Over time, normal wear and tear can eventually catch up and damage the structure and components. Visual and operational inspections keep the crane in peak operating condition, which is where we come in!

Frequent inspection in Vandalia, MO and throughout the Midwest includes looking over the following list of items:

• Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
• Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
• Functional operating mechanisms – Our Vandalia, MO and Midwest specialists look for maladjustment.
• Air or hydraulic systems – We check for leakage or deterioration in tanks, lines, drain pumps, valves, etc.
• Hooks – We look for deformation, cracks, etc.
• Braking motions – Our specialists ensure that there is no excessive drift and that stopping distance is normal.
• Hoist trolley and bridge – We run through complete motions.
• Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
• Safety – Our specialists test safety devices and check that warning and other safety labels are present and legible.

OSHA Annual Overhead Crane Inspection | Periodic Inspections in Vandalia, MO and Throughout the Midwest

Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.

According to OSHA, periodic inspections include checking the following items:

• Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
• Loose rivets or bolts
• Worn or cracked drums and sheaves
• Wind, load, and other indicators over their full range
• Excessive wear on ratchets, pawls, linings, and brake system parts
• Excessive chain stretch or wear on chain drive sprockets
• Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
• Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
• Corroded, cracked, or deformed members

If you neglect to meet these crane inspection requirements, not only will it affect your efficiency and reputation, it could lead to fines if OSHA were to perform a sudden, on-site audit. Call us right away at 866-756-1200 or 866-756-1202 or reach out to us online.

Initial Overhead Crane Inspections For New Equipment in Vandalia, MO and Throughout the Midwest

Any modified, repaired, reinstalled, altered, new, or updated crane needs to be inspected to ensure compliance prior to the first use. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you are able to even use the overhead crane.

These inspections should be performed by qualified representatives in accordance with OEM recommendations to make sure all parts of the system have been installed properly and functionally tested. These trained technicians must provide a full report of the findings. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Contact us right away or give us a call at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Vandalia, MO area or elsewhere throughout the Midwest.

Reach Out To the Leading Overhead Crane Inspectors in Vandalia, MO, Throughout the Midwest | Engineered Lifting Systems

Let our overhead crane inspectors take a look at your overhead crane now. Once we are finished, you can get back at it with the peace of mind knowing your machine is up to government regulations and your crew is safe to do what they do best. An overhead crane at a standstill puts an abrupt halt to your project, along with your deadline and your bottom line. Nobody wants that to happen.

Since that first day in 2004, we have been providing Vandalia, MO and Midwest businesses with OSHA-compliant crane services of any type. To get started on a quote for overhead crane inspection, reach out to us or give our experienced specialists a call right now at 866-756-1200 or 866-756-1202.