Overhead Crane Inspection Pettis County, MO
Overhead crane inspection Pettis County, MO. Because of the weight and overall size of the objects often being transported by overhead cranes, daily usage can lead to degradation or, worse, a dangerous breakdown that puts you, your team, or your company at risk. This is precisely the reason frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not only keep them operating at top efficiency, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Pettis County, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even a complete overhead crane brake rebuild, our main objective since day one in 2004 has been to provide the best inspection services and equipment for your crane system that meets the most challenging manufacturing requirements in Pettis County, MO and throughout the Midwest.
Contact us online or call our team at 866-756-1200 or 866-756-1202 for more information regarding overhead crane inspection or to get started on a quote, reach out to us online or call our team at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Pettis County, MO and Midwest Businesses By Engineered Lifting Systems
Our Pettis County, MO overhead crane company is experienced in performing all types of crane services, including full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry regulations. Inspection frequency is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Pettis County, MO and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of brakes, drive components, mechanical couplings, wire ropes, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues, hazards, or opportunities for improvement
Overhead Crane Inspection Checklist | Frequent Inspections in Pettis County, MO and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and damage the structure and components. Visual and operational inspections keep the crane in peak operating condition, which is where we come in!
Frequent inspections in Pettis County, MO and throughout the Midwest include looking over the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
- Functional operating mechanisms – Our Pettis County, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists make sure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and check that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Pettis County, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These standards for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Wind, load, and other indicators over their full range
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Corroded, cracked, or deformed members
If you fail to meet these crane inspection requisites, not only will it affect your efficiency and reputation, it could lead to fines if OSHA performs a sudden, on-site audit. Give us a call today at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in Pettis County, MO and Throughout the Midwest
Any new, reinstalled, modified, altered, repaired, or updated crane needs to be inspected to ensure compliance before the first use. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you are able to even operate the crane system.
These inspections should be performed by qualified representatives in accordance with OEM recommendations to make sure all working components have been installed properly and functionally tested. These trained technicians need to provide a full report of the results. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Contact us today or give us a call at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Pettis County, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Pettis County, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your overhead crane now. Once we complete the inspection, you can get back at it with the peace of mind knowing your machine meets government regulations and your team is safe to do what they do best. An overhead crane at a standstill puts an abrupt halt to your project, as well as your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Pettis County, MO and Midwest businesses with OSHA-compliant crane services of all kinds. To get begin a quote for overhead crane inspection, reach out to us or call our experienced specialists today at 866-756-1200 or 866-756-1202.