Overhead Crane Inspection St. Clair County, IL
Overhead crane inspection St. Clair County, IL. Due to the size and weight of the objects that are lifted by overhead cranes, daily usage can lead to decline or, worse, a dangerous deficiency that puts you, your team, or your company at risk. This is precisely why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not only keep them working at top efficiency, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your St. Clair County, IL overhead crane system. From initial consultation to inspection, repair services, and maintenance, or even a complete overhead crane brake rebuild, our main goal since that first day in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most demanding manufacturing requirements in St. Clair County, IL and throughout the Midwest.
Reach out to us online or call our team at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection and to get started on a quote, contact us online or call our team at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For St. Clair County, IL and Midwest Businesses By Engineered Lifting Systems
Our St. Clair County, IL overhead crane company is experienced in performing a variety of crane services, including full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. Inspection frequency is based on application, environmental, and service factors. Our inspectors on staff are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in St. Clair County, IL and throughout the Midwest include:
- Frequent Inspections (daily or monthly)
- Periodic Inspections (monthly or annually)
- Initial Crane Inspections
- Written or electronic inspection report for your records
- A review of existing inspection and training records
- Detailed inspection of brakes, drive components, mechanical couplings, wire ropes, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues, hazards, or opportunities for improvement
Along with being the overhead crane inspection company of choice in and around St. Clair County, IL and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in St. Clair County, IL and Throughout the Midwest
Frequent crane inspections performed monthly or as frequent as daily can help identify potential problems and address them before a costly accident occurs. Over time, normal wear and tear can eventually catch up and damage the components and structure. Visual and operational inspections keep the crane in optimal performance, which is where our technicians excel!
Frequent inspections in St. Clair County, IL and throughout the Midwest include looking over the following components:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, any damage to the rope structure, kinks, loss of lubricant, fraying, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our St. Clair County, IL and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in drain pumps, lines, valves, tanks, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists make sure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working condition according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and check that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in St. Clair County, IL and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These standards for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you fail to do these crane inspection requirements, not only will your efficiency suffer, it could lead to fines if OSHA were to perform an on-site audit. Give us a call right away at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in St. Clair County, IL and Throughout the Midwest
Any modified, repaired, reinstalled, altered, new, or updated crane needs to be inspected to ensure compliance before the initial operation. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you can even operate the crane system.
These inspections should be performed by qualified representatives in accordance with OEM recommendations to make sure all parts of the system have been installed properly and functionally tested. These trained technicians need to provide a full report on the findings. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Reach out to us today or give us a call at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the St. Clair County, IL area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in St. Clair County, IL, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your system now. Once we are finished, you can get back at it with the peace of mind knowing your overhead crane meets government regulations and your crew is safe to do what they do best. An overhead crane at a standstill puts an abrupt halt to your worksite, as well as your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing St. Clair County, IL and Midwest businesses with OSHA-compliant crane services of any type, since that first day back in 2004. To get started on a quote for overhead crane inspection, reach out to us or call our experienced specialists right now at 866-756-1200 or 866-756-1202.