Overhead Crane Inspection Little Rock, AR
Overhead crane inspection Little Rock, AR. Due to the size and weight of the objects that are lifted by overhead cranes, daily usage can lead to deterioration or, worse, a dangerous failure that puts your employees, your company, and your processes at risk. Which is exactly the reason why frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not only keep them operating at top efficiency, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Little Rock, AR overhead crane system. From initial consultation to inspection, maintenance, and repair services, or even an entire overhead crane brake rebuild, our main goal since that first day in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most rigorous manufacturing requirements in Little Rock, AR and throughout the Midwest.
Reach out to us online or call our staff at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection or to get started on a quote, contact us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Little Rock, AR and Midwest Businesses By Engineered Lifting Systems
Our Little Rock, AR overhead crane company is specialized in performing all types of crane services, such as full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry regulations. The frequency of inspection is based on service, environmental, and application factors. Our inspectors on staff are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Little Rock, AR and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around Little Rock, AR and throughout the Midwest, Engineered Lifting Systems also provides the following:
Overhead Crane Inspection Checklist | Frequent Inspections in Little Rock, AR and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and wreak havoc on the structure and components. Visual and operational inspections keep the crane in peak performance, which is where our technicians excel!
Frequent inspections in Little Rock, AR and throughout the Midwest include checking the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
- Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
- Functional operating mechanisms – Our Little Rock, AR and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for cracks, deformation, etc.
- Braking motions – Our specialists ensure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Little Rock, AR and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you fail to meet these crane inspection requirements, not only will your efficiency suffer, it could lead to costly fines if OSHA performs a sudden, on-site audit. Call us now at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in Little Rock, AR and Throughout the Midwest
Any new, reinstalled, modified, altered, repaired, or updated crane should be inspected to ensure compliance prior to the first use. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you are able to even operate the overhead crane.
These inspections should be performed by experienced representatives in accordance with OEM recommendations to make sure all parts of the system have been installed properly and functionally tested. These trained technicians need to provide a full report of the results. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in place. Contact us now or give us a call at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Little Rock, AR area or elsewhere throughout the Midwest.
Reach Out To the Leading Overhead Crane Inspectors in Little Rock, AR, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your system now. Once we are finished, you can get back at it with the peace of mind knowing your overhead crane is up to government standards and your team is safe to do what they do best. An inoperable overhead crane puts an abrupt halt to your worksite, along with your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Little Rock, AR and Midwest businesses with OSHA-compliant crane services of all kinds. To get started on a quote for overhead crane inspection, reach out to us or give our experienced specialists a call today at 866-756-1200 or 866-756-1202.