Enclosed Track Work Station Jibs are ideal for supporting tool balancers, air balancers, hoists, and welding wire and can handle up to 200° rotation when wall or column mounted and up to 360° rotation when floor mounted. Available in Freestanding, Wall Cantilever, and Aluminum Tierod styles.
Free Standing
Work Station Jib Cranes are the ideal substitute for traditional, heavy I-Beam Jib Cranes. These jibs are designed to service circular areas and support tool balancers, air balancers, vacuum lifters, and hoists. When floor mounted, they can accommodate up to a 360°rotation. Capacities are available from 100 lbs. to 1000 lbs. with spans up to 16 feet.
- Capacities from 100 lb. to 1000 lb., with spans up to 16 ft.
- Offer 360° rotation.
- Most can be bolted directly to existing floor without adding special foundations.
- Utilize enclosed track for the boom assembly, which reduces dead weight for easier rotation than traditional I-beam jibs.
- Feature a retaining pin through the pivot pin to help resist accidental upward dislodgment of the boom assembly.
- Include hoist trolley.
- Roller bearings provide for unsurpassed ease of movement.
Wall Cantilever
Work Station Jib Cranes are the ideal substitute for traditional, heavy I-Beam Jib Cranes. These jibs are designed to service circular areas and support tool balancers, air balancers, vacuum lifters, and hoists. When column or wall mounted, they can handle up to a 200°rotation. Capacities are available from 100 lbs. to 1000 lbs. with spans up to 16 feet.
- Available in steel (all capacities) or stainless steel (capacities to 500 lb.).
- Offer 200° rotation.
- Can be wall or column mounted.
- Utilize enclosed track for the boom assembly, which reduces dead weight for easier rotation than traditional I-beam jibs.
- Use tapered roller bearings at the pivot points for unsurpassed ease of rotation.
Aluminum Tierod
The AL100 Wall Bracket Work Station Jib Crane utilizes Gorbel’s patented light-weight, high strength extruded aluminum enclosed track. This revolutionary track reduces the rotational dead weight of the boom by 56% to 68%, making the jib up to 40% easier to rotate than comparable I-beam jibs. The tie rod design minimizes deflection and is more precise when positioning loads than other jibs.
- Wall mounted or column mounted
- Available in capacities from 150-2000 lbs. and spans up to 20 feet. (not available for 2000 lbs.)
- Utilizes Gorbel’s patented light weight, high-strength extruded enclosed track on the boom.
- Weighs up to 355 lbs.
- Rotates up to 40% easier than a traditional I-Beam Jib.
- Less deflection for easier load control and positioning.
Contact Engineered Lifting today for assistance and information on Gorbel Work Station Jib cranes.