Overhead Crane Inspection Centralia, IL
Overhead crane inspection Centralia, IL. Because of the weight and overall size of the objects that are transported by overhead cranes, daily usage can lead to deterioration or, worse, a dangerous deficiency that puts you, your team, or your company at risk. Which is exactly why frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not only keep them working at peak performance, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Centralia, IL overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even an entire overhead crane brake rebuild, our main objective since that first day in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most demanding manufacturing standards in Centralia, IL and throughout the Midwest.
Reach out to us online or call our staff at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection or to get started on a quote, contact us online or call our team at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Centralia, IL and Midwest Businesses By Engineered Lifting Systems
Our Centralia, IL overhead crane company is experienced in performing a variety of crane services, such as comprehensive inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry standards. Inspection frequency is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Centralia, IL and throughout the Midwest include:
- Frequent Inspections (daily or monthly)
- Periodic Inspections (monthly or annually)
- Initial Crane Inspections
- Written or electronic inspection report for your records
- A review of existing inspection and training records
- Detailed inspection of limits and limit operation, wire ropes, drive components, mechanical couplings, and brakes
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
Along with being the overhead crane inspection company of choice in and around Centralia, IL and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Centralia, IL and Throughout the Midwest
Frequent crane inspections performed monthly or as often as daily can help identify potential problems and address them before a costly accident occurs. The daily usage of your crane means normal wear and tear can eventually catch up and wreak havoc on the structure and components. Visual and operational inspections keep the crane in peak performance, which is where our technicians excel!
Frequent inspection in Centralia, IL and throughout the Midwest includes looking over the following components:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
- Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Centralia, IL and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists make sure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and make sure that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Centralia, IL and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Corroded, cracked, or deformed members
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Wind, load, and other indicators over their full range
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
If you fail to meet these crane inspection requirements, not only will your efficiency suffer, it could lead to costly fines if OSHA performs a sudden, on-site audit. Call us today at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Centralia, IL and Throughout the Midwest
Any modified, repaired, reinstalled, altered, new, or updated crane should be inspected to ensure compliance before the initial operation. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you are able to even operate the crane system.
These inspections should be performed by certified representatives in accordance with OEM recommendations to make sure all parts of the system have been installed properly and functionally tested. These trained technicians must provide a full report of the results. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in place. Reach out to us now or call us at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Centralia, IL area or elsewhere throughout the Midwest.
Reach Out To the Leading Overhead Crane Inspectors in Centralia, IL, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your overhead crane now. Once we are finished, you can get back to work with the peace of mind knowing your machine is up to government standards and your crew is safe to do what they do best. An overhead crane at a standstill puts a costly halt to your worksite, as well as your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Centralia, IL and Midwest businesses with OSHA-compliant crane services of all kinds. To get started on a quote for overhead crane inspection, contact us or call our experienced specialists today at 866-756-1200 or 866-756-1202.