Overhead Crane Inspection Johnson County, KS
Overhead crane inspection Johnson County, KS. Due to the weight and overall size of the objects often being transported by overhead cranes, daily usage can lead to decline or, worse, a dangerous failure that puts your employees, your company, and your processes at risk. Which is precisely the reason why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not only keep them working at peak performance, but also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Johnson County, KS overhead crane system. From initial consultation to inspection, maintenance, and repair services, or even an entire overhead crane brake rebuild, our primary objective since day one in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most rigorous manufacturing requirements in Johnson County, KS and throughout the Midwest.
Overhead Crane Inspection Services For Johnson County, KS and Midwest Businesses By Engineered Lifting Systems
Our Johnson County, KS overhead crane company is specialized in performing all types of crane services, such as full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. The frequency of inspection is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Johnson County, KS and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of limits and limit operation, wire ropes, drive components, mechanical couplings, and brakes
- Consultation on inspection reports and actionable items regarding mechanical issues, hazards, or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around Johnson County, KS and throughout the Midwest, Engineered Lifting Systems also provides the following:
Overhead Crane Inspection Checklist | Frequent Inspections in Johnson County, KS and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and wreak havoc on the structure and components. Operational and visual inspections keep the crane in optimal operating condition, which is where we come in!
Frequent inspections in Johnson County, KS and throughout the Midwest include examining the following list of items:
- Wire ropes – The Engineered Lifting Systems professionals look for any damage or deformation to the rope structure, fraying, loss of lubricant, broken strands, kinks, etc.
- Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
- Functional operating mechanisms – Our Johnson County, KS and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists ensure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working condition according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Johnson County, KS and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These standards for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you fail to meet these crane inspection requirements, not only will your efficiency suffer, it could lead to costly fines if OSHA performs a sudden, on-site audit. Give us a call today at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Johnson County, KS and Throughout the Midwest
Any updated, new, repaired, reinstalled, modified, or altered crane should be inspected to ensure compliance prior to the first use. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you can even use the crane system.
These inspections should be performed by certified representatives in accordance with OEM recommendations to make sure all working components have been tested and properly installed. These trained technicians must provide a full report of the findings. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in place. Contact us today or give us a call at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Johnson County, KS area or elsewhere throughout the Midwest.
Reach Out To the Leading Overhead Crane Inspectors in Johnson County, KS, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your overhead crane today. Once we are finished, you can get back to work with the peace of mind knowing your system meets government standards and your team is safe to do what they do best. An inoperable overhead crane puts an abrupt halt to your worksite, along with your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Johnson County, KS and Midwest businesses with OSHA-compliant crane services of all kinds. To get started on a quote for overhead crane inspection, contact us or call our experienced specialists right away at 866-756-1200 or 866-756-1202.