Overhead Crane Inspection Nevada, MO
Overhead crane inspection Nevada, MO. Because of the size and weight of the objects often being lifted by overhead cranes, daily usage can lead to decline or, worse, a dangerous failure that puts you, your team, or your company at risk. This is precisely the reason periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not just keep them working at top efficiency, but also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Nevada, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even a complete overhead crane brake rebuild, our primary goal since day one in 2004 has been to provide the right inspection services and equipment for your overhead crane system that meets the most demanding manufacturing mandates in Nevada, MO and throughout the Midwest.
Contact us online or call our team at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection and to get started on a quote, contact us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Nevada, MO and Midwest Businesses By Engineered Lifting Systems
Our Nevada, MO overhead crane company is experienced in performing a variety of crane services, including comprehensive inspections where we go through an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry regulations. The frequency of inspection is based on service, environmental, and application factors. Our inspectors on staff are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Nevada, MO and throughout the Midwest include:
- Initial Crane Inspections
- Periodic Inspections (monthly to annually)
- Frequent Inspections (daily to monthly)
- A review of existing training and inspection records
- Electronic or written inspection report for your records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around Nevada, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Nevada, MO and Throughout the Midwest
Frequent crane inspections performed monthly or as often as daily can help identify potential problems and address them before a costly accident occurs. The daily usage of your crane means normal wear and tear can eventually catch up and damage the structure and components. Visual and operational inspections keep the crane in peak operating condition, which is where we come in!
Frequent inspection in Nevada, MO and throughout the Midwest includes examining the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
- Hoist chains and end connections – Our specialists look for stretch beyond manufacturer’s recommendations, twists, distorted links interfering with proper function, or excessive wear. If necessary, we add some lubrication.
- Functional operating mechanisms – Our Nevada, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in drain pumps, lines, valves, tanks, etc.
- Hooks – We look for cracks, deformation, etc.
- Braking motions – Our specialists ensure that stopping distance is normal and that there is not excessive drift.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and check that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Nevada, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you neglect to do these crane inspection requirements, not only will your efficiency suffer, it could lead to fines if OSHA performs a sudden, on-site audit. Give us a call today at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Nevada, MO and Throughout the Midwest
Any new, reinstalled, modified, altered, repaired, or updated crane is required to be inspected to ensure compliance prior to the first use. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you can even use the overhead crane.
These inspections should be performed by qualified representatives in accordance with OEM recommendations to make sure all parts of the system have been tested and properly installed. These trained technicians need to provide a full report on the results. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Reach out to us now or call us at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Nevada, MO area or elsewhere throughout the Midwest.
Reach Out To the Leading Overhead Crane Inspectors in Nevada, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your system now. Once we are finished, you can get back at it with the peace of mind knowing your overhead crane is up to government standards and your crew is safe to do what they do best. An inoperable overhead crane puts an abrupt halt to your worksite, along with your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Nevada, MO and Midwest businesses with OSHA-compliant crane services of any type. To get started on a quote for overhead crane inspection, reach out to us or give our experienced specialists a call right now at 866-756-1200 or 866-756-1202.