Overhead Crane Inspection Bloomington, IL
Overhead crane inspection Bloomington, IL. Due to the weight and overall size of the objects that are lifted by overhead cranes, daily operation can lead to degradation or, worse, a dangerous failure that puts your employees, your company, and your processes at risk. Which is exactly the reason periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not simply keep them working at top efficiency, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s answer for your company’s search – providing everything you need for your Bloomington, IL overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even a complete overhead crane brake rebuild, our primary goal since day one in 2004 has been to provide the best inspection services and equipment for your crane system that meets the most demanding manufacturing requirements in Bloomington, IL and throughout the Midwest.
Contact us online or call our staff at 866-756-1200 or 866-756-1202 for more information regarding overhead crane inspection or to get started on a quote, reach out to us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Bloomington, IL and Midwest Businesses By Engineered Lifting Systems
Our Bloomington, IL overhead crane company is specialized in performing all types of crane services, including comprehensive inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry standards. Inspection frequency is based on application, environmental, and service factors. Our inspectors on staff are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Bloomington, IL and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around Bloomington, IL and throughout the Midwest, Engineered Lifting Systems also provides the following:
Overhead Crane Inspection Checklist | Frequent Inspections in Bloomington, IL and Throughout the Midwest
Frequent crane inspections performed monthly or as frequent as daily can help identify potential problems and address them before a costly accident occurs. The daily usage of your crane means normal wear and tear can eventually catch up and damage the components and structure. Operational and visual inspections keep the crane in optimal performance, which is where our technicians excel!
Frequent inspections in Bloomington, IL and throughout the Midwest include examining the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Bloomington, IL and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in lines, tanks, valves, drain pumps, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists ensure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Bloomington, IL and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These regulations for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Wind, load, and other indicators over their full range
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Corroded, cracked, or deformed members
If you fail to meet these crane inspection requirements, not only will it affect your efficiency and reputation, it could lead to costly fines if OSHA were to perform a sudden, on-site audit. Call us right away at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Bloomington, IL and Throughout the Midwest
Any updated, new, repaired, reinstalled, modified, or altered crane is required to be inspected to ensure compliance before the initial operation. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you can even operate the overhead crane.
These inspections should be performed by experienced representatives in accordance with OEM recommendations to make sure all working components have been installed properly and functionally tested. These trained technicians need to provide a full report of the results. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Reach out to us today or call us at 866-756-1200 or 866-756-1202 to come take a look at your new crane before getting started in the Bloomington, IL area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Bloomington, IL, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your system today. Once we are finished, you can get back at it with the peace of mind knowing your overhead crane is up to government standards and your crew is safe to do what they do best. An inoperable overhead crane puts a costly halt to your project, as well as your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing Bloomington, IL and Midwest businesses with OSHA-compliant crane services of any type, since that first day in 2004. To get started on a quote for overhead crane inspection, contact us or call our experienced specialists right away at 866-756-1200 or 866-756-1202.