Overhead Crane Inspection Joplin, MO
Overhead crane inspection Joplin, MO. Because of the size and weight of the objects often being transported by overhead cranes, daily operation can lead to degradation or, worse, a dangerous failure that puts your employees, your company, and your processes at risk. This is precisely why frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not just keep them operating at peak performance, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Joplin, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even a complete overhead crane brake rebuild, our primary objective since day one in 2004 has been to provide the right inspection services and equipment for your overhead crane system that meets the most rigorous manufacturing mandates in Joplin, MO and throughout the Midwest.
Reach out to us online or call our team at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection or to get started on a quote, contact us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Joplin, MO and Midwest Businesses By Engineered Lifting Systems
Our Joplin, MO overhead crane company is specialized in performing a variety of crane services, such as full inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry standards. The frequency of inspection is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Joplin, MO and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of brakes, drive components, mechanical couplings, wire ropes, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
Overhead Crane Inspection Checklist | Frequent Inspections in Joplin, MO and Throughout the Midwest
Frequent crane inspections performed monthly or as frequent as daily can help identify potential problems and address them before a costly accident occurs. The daily usage of your crane means normal wear and tear can eventually catch up and wreak havoc on the components and structure. Operational and visual inspections keep the crane in optimal operating condition, which is where we come in!
Frequent inspections in Joplin, MO and throughout the Midwest include examining the following items:
- Wire ropes – The Engineered Lifting Systems professionals look for any damage or deformation to the rope structure, fraying, loss of lubricant, broken strands, kinks, etc.
- Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Joplin, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in drain pumps, lines, valves, tanks, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists ensure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Joplin, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These standards for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspection includes checking the following items:
- Corroded, cracked, or deformed members
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Wind, load, and other indicators over their full range
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
If you fail to do these crane inspection requirements, not only will it affect your efficiency and reputation, it could lead to fines if OSHA performs a sudden, on-site audit. Give us a call now at 866-756-1200 or 866-756-1202 or contact us online.
Initial Overhead Crane Inspections For New Equipment in Joplin, MO and Throughout the Midwest
Any new, reinstalled, modified, altered, repaired, or updated crane needs to be inspected to ensure compliance before the first use. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you are able to even operate the crane system.
These inspections should be performed by experienced representatives in accordance with OEM recommendations to make sure all parts of the system have been tested and properly installed. These trained technicians need to provide a written report of the findings. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in place. Contact us now or call us at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Joplin, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Joplin, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your overhead crane today. Once we complete the inspection, you can get back at it with the peace of mind knowing your system meets government regulations and your crew is safe to do what they do best. An overhead crane at a standstill puts an abrupt halt to your project, as well as your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Joplin, MO and Midwest businesses with OSHA-compliant crane services of all kinds. To get started on a quote for overhead crane inspection, reach out to us or give our experienced specialists a call right away at 866-756-1200 or 866-756-1202.