Overhead Crane Inspection Fort Smith, AR
Overhead crane inspection Fort Smith, AR. Due to the weight and overall size of the objects often being lifted by overhead cranes, daily usage can lead to degradation or, worse, a dangerous deficiency that puts you, your team, or your company at risk. This is exactly the reason frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not only keep them working at top efficiency, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Fort Smith, AR overhead crane system. From initial consultation to inspection, repair services, and maintenance, or even an entire overhead crane brake rebuild, our main objective since day one in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most challenging manufacturing mandates in Fort Smith, AR and throughout the Midwest.
For more information regarding overhead crane inspection and to get started on a quote, reach out to us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Fort Smith, AR and Midwest Businesses By Engineered Lifting Systems
Our Fort Smith, AR overhead crane company is experienced in performing many different kinds of crane services, including full inspections where we go through an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. The frequency of inspection is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Fort Smith, AR and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of limits and limit operation, wire ropes, drive components, mechanical couplings, and brakes
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
Overhead Crane Inspection Checklist | Frequent Inspections in Fort Smith, AR and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. Over time, normal wear and tear can eventually catch up and damage the structure and components. Operational and visual inspections keep the crane in optimal performance, which is where our technicians excel!
Frequent inspections in Fort Smith, AR and throughout the Midwest include checking the following components:
- Wire ropes – The Engineered Lifting Systems professionals look for any damage or deformation to the rope structure, fraying, loss of lubricant, broken strands, kinks, etc.
- Hoist chains and end connections – Our specialists look for stretch beyond manufacturer’s recommendations, twists, distorted links interfering with proper function, or excessive wear. We then add lubrication, if necessary.
- Functional operating mechanisms – Our Fort Smith, AR and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in drain pumps, lines, valves, tanks, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists make sure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and make sure that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Fort Smith, AR and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for yearly inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Corroded, cracked, or deformed members
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Wind, load, and other indicators over their full range
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
If you fail to meet these crane inspection requirements, not only will it affect your efficiency and reputation, it could lead to costly fines if OSHA performs a sudden, on-site audit. Give us a call right away at 866-756-1200 or 866-756-1202 or reach out to us online.
Initial Overhead Crane Inspections For New Equipment in Fort Smith, AR and Throughout the Midwest
Any updated, new, repaired, reinstalled, modified, or altered crane needs to be inspected to ensure compliance prior to the initial operation. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you are able to even use the crane system.
These inspections should be performed by experienced representatives in accordance with OEM recommendations to make sure all working components have been tested and properly installed. These trained technicians need to provide a full report of the findings. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Reach out to us now or give us a call at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Fort Smith, AR area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Fort Smith, AR, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors take a look at your system today. Once we complete the inspection, you can get back at it with the peace of mind knowing your overhead crane meets government regulations and your crew is safe to do what they do best. An inoperable overhead crane puts a costly halt to your project, as well as your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing Fort Smith, AR and Midwest businesses with OSHA-compliant crane services of any type, since that first day in 2004. To get started on a quote for overhead crane inspection, contact us or give our experienced specialists a call right now at 866-756-1200 or 866-756-1202.