Overhead Crane Inspection Maryland Heights, MO
Overhead crane inspection Maryland Heights, MO. Because of the size and weight of the objects that are transported by overhead cranes, daily usage can lead to degradation or, worse, a dangerous failure that puts your employees, your company, and your processes at risk. Which is exactly the reason frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not just keep them operating at top efficiency, but to also reduce expensive downtime, extend the life of your crane system, and keep your staff safe.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Maryland Heights, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or perhaps even a complete overhead crane brake rebuild, our main objective since that first day in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most rigorous manufacturing requirements in Maryland Heights, MO and throughout the Midwest.
Contact us online or call our staff at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection or to get started on a quote, reach out to us online or call our staff at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Maryland Heights, MO and Midwest Businesses By Engineered Lifting Systems
Our Maryland Heights, MO overhead crane company is experienced in performing all types of crane services, such as full inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing documentation for compliance with industry regulations. The frequency of inspection is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following standards:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services offered by Engineered Lifting Systems in Maryland Heights, MO and throughout the Midwest include:
- Frequent Inspections (daily or monthly)
- Periodic Inspections (monthly or annually)
- Initial Crane Inspections
- Written or electronic inspection report for your records
- A review of existing inspection and training records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues, hazards, or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around Maryland Heights, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Maryland Heights, MO and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and wreak havoc on the components and structure. Operational and visual inspections keep the crane in optimal operating condition, which is where our technicians excel!
Frequent inspections in Maryland Heights, MO and throughout the Midwest include checking the following components:
- Wire ropes – The Engineered Lifting Systems professionals look for any damage or deformation to the rope structure, fraying, loss of lubricant, broken strands, kinks, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
- Functional operating mechanisms – Our Maryland Heights, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for deterioration or leakage in tanks, lines, drain pumps, valves, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists make sure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
- Safety – Our specialists test safety devices and check that warning and other safety labels are apparent and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Maryland Heights, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which calls for inspections to be performed periodically in 1- to 12-month intervals. These standards for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Wind, load, and other indicators over their full range
- Worn or cracked drums and sheaves
- Loose rivets or bolts
- Corroded, cracked, or deformed members
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Excessive chain stretch or wear on chain drive sprockets
If you fail to do these crane inspection requirements, not only will your efficiency suffer, it could lead to costly fines if OSHA performs a sudden, on-site audit. Give us a call right away at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Maryland Heights, MO and Throughout the Midwest
Any updated, new, repaired, reinstalled, modified, or altered crane should be inspected to ensure compliance prior to the first use. For instance, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is less than 80 percent of the maximum load sustained during the test before you can even operate the overhead crane.
These inspections should be performed by certified representatives in accordance with OEM recommendations to ensure that all parts of the system have been tested and properly installed. These trained technicians must provide a full report on the results. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Contact us now or give us a call at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Maryland Heights, MO area or elsewhere throughout the Midwest.
Contact the Leading Overhead Crane Inspectors in Maryland Heights, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your system today. Once we complete the inspection, you can get back to work with the peace of mind knowing your overhead crane meets government standards and your crew is safe to do what they do best. An inoperable overhead crane puts an abrupt halt to your project, along with your deadline and your bottom line. Nobody wants that to happen.
Since that first day in 2004, we have been providing Maryland Heights, MO and Midwest businesses with OSHA-compliant crane services of all kinds. To get begin a quote for overhead crane inspection, reach out to us or call our experienced specialists right away at 866-756-1200 or 866-756-1202.