Newton County, MO

Overhead Crane Inspection Newton County, MO

Overhead crane inspection Newton County, MO. Due to the size and weight of the objects that are lifted by overhead cranes, daily usage can lead to deterioration or, worse, a dangerous deficiency that puts your employees, your company, and your processes at risk. This is precisely the reason frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not just keep them working at top efficiency, but to also keep your staff safe, reduce costly downtime, and extend the life of your equipment.

Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Newton County, MO overhead crane system. From initial consultation to inspection, maintenance, and repair services, or perhaps even an entire overhead crane brake rebuild, our primary goal since that first day in 2004 has been to provide the right inspection services and equipment for your overhead crane system that meets the most challenging manufacturing mandates in Newton County, MO and throughout the Midwest.

For more information regarding overhead crane inspection or to get started on a quote, reach out to us online or call our staff at 866-756-1200 or 866-756-1202.

Overhead Crane Inspection Services For Newton County, MO and Midwest Businesses By Engineered Lifting Systems

Our Newton County, MO overhead crane company is experienced in performing a variety of crane services, such as comprehensive inspections where we go through an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry standards. Inspection frequency is based on service, environmental, and application factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:

• Occupational Safety and Health Administration (OSHA)
• American Society of Mechanical Engineers (ASME)
• Construction Management Association of America (CMAA)

Overhead crane inspection services offered by Engineered Lifting Systems in Newton County, MO and throughout the Midwest include:

Along with being the overhead crane inspection company of choice in and around Newton County, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:

• Overhead Crane Repair
• Overhead Crane Brakes
• Overhead Crane Service
• Overhead Crane Automation
• Electric Hoists

Overhead Crane Inspection Checklist | Frequent Inspections in Newton County, MO and Throughout the Midwest

Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and wreak havoc on the structure and components. Operational and visual inspections keep the crane in optimal operating condition, which is where our technicians excel!

Frequent inspections in Newton County, MO and throughout the Midwest include checking the following components:

• Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
• Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
• Functional operating mechanisms – Our Newton County, MO and Midwest specialists look for maladjustment.
• Air or hydraulic systems – We check for leakage or deterioration in tanks, lines, drain pumps, valves, etc.
• Hooks – We look for cracks, deformation, etc.
• Braking motions – Our specialists make sure that stopping distance is normal and that there is not excessive drift.
• Hoist trolley and bridge – We run through complete motions.
• Rope reeving – We ensure it is in working condition according to manufacturers’ recommendations.
• Safety – Our specialists test safety devices and check that warning and other safety labels are present and legible.

OSHA Annual Overhead Crane Inspection | Periodic Inspections in Newton County, MO and Throughout the Midwest

Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.

According to OSHA, periodic inspections include checking the following items:

• Wind, load, and other indicators over their full range
• Worn or cracked drums and sheaves
• Loose rivets or bolts
• Corroded, cracked, or deformed members
• Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
• Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
• Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
• Excessive wear on ratchets, pawls, linings, and brake system parts
• Excessive chain stretch or wear on chain drive sprockets

If you fail to do these crane inspection requirements, not only will your efficiency suffer, it could lead to fines if OSHA performs a sudden, on-site audit. Give us a call right away at 866-756-1200 or 866-756-1202 or reach out to us online.

Initial Overhead Crane Inspections For New Equipment in Newton County, MO and Throughout the Midwest

Any new, reinstalled, modified, altered, repaired, or updated crane needs to be inspected to ensure compliance prior to the first use. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even operate the crane system.

These inspections should be performed by experienced representatives in accordance with OEM recommendations to make sure all parts of the system have been tested and properly installed. These trained technicians need to provide a full report of the findings. At Engineered Lifting Systems, our team is proud to have the pertinent crane inspection certifications in order. Contact us now or call us at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Newton County, MO area or elsewhere throughout the Midwest.

Reach Out To the Leading Overhead Crane Inspectors in Newton County, MO, Throughout the Midwest | Engineered Lifting Systems

Let our overhead crane inspectors check out your overhead crane today. Once we complete the inspection, you can get back to work with the peace of mind knowing your system is up to government standards and your team is safe to do what they do best. An inoperable overhead crane puts a costly halt to your project, as well as your deadline and your bottom line. Nobody wants that to happen.

Engineered Lifting Systems has been providing Newton County, MO and Midwest businesses with OSHA-compliant crane services of all kinds, since that first day in 2004. To get begin a quote for overhead crane inspection, reach out to us or give our experienced specialists a call today at 866-756-1200 or 866-756-1202.