Overhead Crane Inspection Columbia, MO
Overhead crane inspection Columbia, MO. Due to the size and weight of the objects often being transported by overhead cranes, daily operation can lead to deterioration or, worse, a dangerous failure that puts your employees, your company, and your processes at risk. Which is precisely the reason why periodic and frequent crane inspections from Engineered Lifting Systems are necessary to not simply keep them operating at top efficiency, but also keep your staff safe, reduce costly downtime, and extend the life of your equipment.
Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Columbia, MO overhead crane system. From initial consultation to inspection, maintenance, and repair services, or even an entire overhead crane brake rebuild, our main objective since that first day in 2004 has been to provide the best inspection services and equipment for your overhead crane system that meets the most demanding manufacturing requirements in Columbia, MO and throughout the Midwest.
Reach out to us online or call our staff at 866-756-1200 or 866-756-1202 to learn more about overhead crane inspection and to get started on a quote, contact us online or call our team at 866-756-1200 or 866-756-1202.
Overhead Crane Inspection Services For Columbia, MO and Midwest Businesses By Engineered Lifting Systems
Our Columbia, MO overhead crane company is experienced in performing a variety of crane services, such as comprehensive inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry regulations. Inspection frequency is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:
- Occupational Safety and Health Administration (OSHA)
- American Society of Mechanical Engineers (ASME)
- Construction Management Association of America (CMAA)
Overhead crane inspection services performed by Engineered Lifting Systems in Columbia, MO and throughout the Midwest include:
- Initial Crane Inspections
- Frequent Inspections (daily to monthly)
- Periodic Inspections (monthly or annually)
- A review of existing inspection and training records
- Written or electronic inspection report for your records
- Detailed inspection of drive components, wire ropes, brakes, mechanical couplings, limits and limit operation
- Consultation on inspection reports and actionable items regarding mechanical issues and hazards or opportunities for improvement
In addition to being the overhead crane inspection company of choice in and around Columbia, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:
- Overhead Crane Repair
- Overhead Crane Brakes
- Overhead Crane Service
- Overhead Crane Automation
- Electric Hoists
Overhead Crane Inspection Checklist | Frequent Inspections in Columbia, MO and Throughout the Midwest
Having a frequent crane inspection performed daily or monthly will diagnose problems before they have the chance to develop into accidents that cause expensive downtime. The daily usage of your crane means normal wear and tear can eventually catch up and wreak havoc on the structure and components. Visual and operational inspections keep the crane in peak operating condition, which is where we come in!
Frequent inspection in Columbia, MO and throughout the Midwest includes checking the following list of items:
- Wire ropes – The Engineered Lifting Systems professionals look for broken strands, fraying, kinks, any deformation or damage to the rope structure, loss of lubricant, etc.
- Hoist chains and end connections – Our specialists look for distorted links interfering with proper function, excessive wear, twists, and stretch beyond manufacturer’s recommendations. If necessary, we add some lubrication.
- Functional operating mechanisms – Our Columbia, MO and Midwest specialists look for maladjustment.
- Air or hydraulic systems – We check for leakage or deterioration in drain pumps, lines, valves, tanks, etc.
- Hooks – We look for deformation, cracks, etc.
- Braking motions – Our specialists make sure that there is no excessive drift and that stopping distance is normal.
- Hoist trolley and bridge – We run through complete motions.
- Rope reeving – We ensure it is in working order according to manufacturers’ recommendations.
- Safety – Our specialists test safety components and make sure that warning and other safety labels are present and legible.
OSHA Annual Overhead Crane Inspection | Periodic Inspections in Columbia, MO and Throughout the Midwest
Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These regulations for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.
According to OSHA, periodic inspections include checking the following items:
- Corroded, cracked, or deformed members
- Loose rivets or bolts
- Worn or cracked drums and sheaves
- Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
- Excessive wear on ratchets, pawls, linings, and brake system parts
- Wind, load, and other indicators over their full range
- Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
- Excessive chain stretch or wear on chain drive sprockets
- Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
If you fail to do these crane inspection requirements, not only will your efficiency suffer, it could lead to costly fines if OSHA were to perform a sudden, on-site audit. Give us a call today at 866-756-1200 or 866-756-1202 or connect with us online.
Initial Overhead Crane Inspections For New Equipment in Columbia, MO and Throughout the Midwest
Any new, reinstalled, modified, altered, repaired, or updated crane needs to be inspected to ensure compliance prior to the first use. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even use the overhead crane.
These inspections should be performed by certified representatives in accordance with OEM recommendations to ensure that all parts of the system have been tested and properly installed. These trained technicians need to provide a written report of the results. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in order. Contact us now or call us at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Columbia, MO area or elsewhere throughout the Midwest.
Reach Out To the Leading Overhead Crane Inspectors in Columbia, MO, Throughout the Midwest | Engineered Lifting Systems
Let our overhead crane inspectors check out your system now. Once we are finished, you can get back to work with the peace of mind knowing your machine is up to government regulations and your crew is safe to do what they do best. An inoperable overhead crane puts an abrupt halt to your worksite, as well as your deadline and your bottom line. Nobody wants that to happen.
Engineered Lifting Systems has been providing Columbia, MO and Midwest companies with OSHA-compliant crane services of all kinds, since that first day back in 2004. To get begin a quote for overhead crane inspection, reach out to us or give our experienced specialists a call right now at 866-756-1200 or 866-756-1202.