Overhead Crane Inspection Washington County, MO

Overhead crane inspection Washington County, MO. Due to the weight and overall size of the objects often being transported by overhead cranes, daily operation can lead to decline or, worse, a dangerous failure that puts you, your team, or your company at risk. Which is precisely the reason why frequent and periodic crane inspections from Engineered Lifting Systems are necessary to not only keep them operating at top efficiency, but to also keep your staff safe, reduce costly downtime, and extend the life of your equipment.

Founded in St. Louis in 2004, Engineered Lifting Systems is the Midwest’s crane solution – providing everything you need for your Washington County, MO overhead crane system. From initial consultation to inspection, repair services, and maintenance, or even an entire overhead crane brake rebuild, our primary objective since that first day in 2004 has been to provide the right inspection services and equipment for your crane system that meets the most challenging manufacturing standards in Washington County, MO and throughout the Midwest.

To learn more about overhead crane inspection and to get started on a quote, reach out to us online or call our team at 866-756-1200 or 866-756-1202.

 


Overhead Crane Inspection Washington County, MO | Midwest Crane Equipment Near Washington County, MO | Engineered Lifting Systems

Overhead Crane Inspection Services For Washington County, MO and Midwest Businesses By Engineered Lifting Systems

Our Washington County, MO overhead crane company is experienced in performing a variety of crane services, such as full inspections in which we will complete an extensive crane inspection checklist – auditing your machines and providing the necessary documentation for compliance with industry regulations. The frequency of inspection is based on application, environmental, and service factors. Our staff inspectors are certified to perform inspections for compliance with the following regulations:

Overhead crane inspection services performed by Engineered Lifting Systems in Washington County, MO and throughout the Midwest include:

  • Initial Crane Inspections
  • Periodic Inspections (monthly to annually)
  • Frequent Inspections (daily to monthly)
  • A review of existing training and inspection records
  • Electronic or written inspection report for your records
  • Detailed inspection of limits and limit operation, wire ropes, drive components, mechanical couplings, and brakes
  • Consultation on inspection reports and actionable items regarding mechanical issues, hazards, or opportunities for improvement


Along with being the overhead crane inspection company of choice in and around Washington County, MO and throughout the Midwest, Engineered Lifting Systems also provides the following:

Overhead Crane Inspection Checklist | Frequent Inspections in Washington County, MO and Throughout the Midwest

Frequent crane inspections performed monthly or as frequent as daily can help identify potential problems and address them before a costly accident occurs. The daily usage of your crane means normal wear and tear can eventually catch up and wreak havoc on the components and structure. Visual and operational inspections keep the crane in optimal operating condition, which is where we come in!

Frequent inspections in Washington County, MO and throughout the Midwest include examining the following components:

  • Wire ropes – The Engineered Lifting Systems professionals look for any damage or deformation to the rope structure, fraying, loss of lubricant, broken strands, kinks, etc.
  • Hoist chains and end connections – Our specialists look for excessive wear, twists, distorted links interfering with proper function, or stretch beyond manufacturer’s recommendations. We then add lubrication, if necessary.
  • Functional operating mechanisms – Our Washington County, MO and Midwest specialists look for maladjustment.
  • Air or hydraulic systems – We check for deterioration or leakage in drain pumps, lines, valves, tanks, etc.
  • Hooks – We look for deformation, cracks, etc.
  • Braking motions – Our specialists ensure that there is no excessive drift and that stopping distance is normal.
  • Hoist trolley and bridge – We run through complete motions.
  • Rope reeving – We make sure it is in working condition according to manufacturers’ recommendations.
  • Safety – Our specialists test safety components and check that warning and other safety labels are apparent and legible.

OSHA Annual Overhead Crane Inspection | Periodic Inspections in Washington County, MO and Throughout the Midwest

Overhead crane safety is regulated by the OSHA in 29 Code of Federal Regulations (CFR) 1910.179 which dictates that inspections should be performed on a periodic basis of every one to 12 months. These standards for annual inspection are to determine if any deficiencies are observed and if they constitute a safety hazard.

According to OSHA, periodic inspections include checking the following items:

  • Wind, load, and other indicators over their full range
  • Worn or cracked drums and sheaves
  • Loose rivets or bolts
  • Corroded, cracked, or deformed members
  • Distorted, cracked, or worn parts such as shafts, bearings, rollers, pins, gears, clamping and locking devices
  • Pitting or deterioration of pushbutton stations, limit switches, and controller contactors
  • Improper performance or non-safety-compliant electric, gasoline, diesel, or other power plants
  • Excessive wear on ratchets, pawls, linings, and brake system parts
  • Excessive chain stretch or wear on chain drive sprockets

If you neglect to do these crane inspection requirements, not only will it affect your efficiency and reputation, it could lead to costly fines if OSHA performs a sudden, on-site audit. Give us a call right away at 866-756-1200 or 866-756-1202 or reach out to us online.


Overhead Crane Inspection Washington County, MO | Midwest Crane Inspection in Washington County, MO | Engineered Lifting Systems

Initial Overhead Crane Inspections For New Equipment in Washington County, MO and Throughout the Midwest

Any new, reinstalled, modified, altered, repaired, or updated crane is required to be inspected to ensure compliance prior to the first use. For example, ASME’s ANSI B30.11 requires a Rated Load Test confirming that the load rating is no more than 80 percent of the maximum load sustained during the test before you can even use the overhead crane.

These inspections should be performed by certified representatives in accordance with OEM recommendations to ensure that all working components have been installed properly and functionally tested. These trained technicians need to provide a full report of the results. At Engineered Lifting Systems, we have all pertinent crane inspection certifications in place. Reach out to us today or give us a call at 866-756-1200 or 866-756-1202 to take a look at your system before getting to work in the Washington County, MO area or elsewhere throughout the Midwest.


Reach Out To the Leading Overhead Crane Inspectors in Washington County, MO, Throughout the Midwest | Engineered Lifting Systems

Let our overhead crane inspectors take a look at your system today. Once we are finished, you can get back to work with the peace of mind knowing your overhead crane is up to government standards and your crew is safe to do what they do best. An overhead crane at a standstill puts an abrupt halt to your worksite, along with your deadline and your bottom line. Nobody wants that to happen.

Engineered Lifting Systems has been providing Washington County, MO and Midwest businesses with OSHA-compliant crane services of any type, since that first day back in 2004. To get started on a quote for overhead crane inspection, reach out to us or give our experienced specialists a call today at 866-756-1200 or 866-756-1202.

Locations

Swing into action with superior solutions in lifting equipment.

Ready to hit the ground running with a new site or get your current equipment back up and running at maximum capacity as soon as possible? You need a reliable partner for your operation's crane and other overhead lifting system needs: a one-stop shop for everything from design and installation to inspections and repairs.

Reap the benefits of working with one of the top overhead crane technical teams in the world when you work with us. Receive personalized support as we help you find the right products and services for your crane and hoist needs, including jib cranes, bridge cranes, freestanding structures, rope hoists, chain hoists and more. It's time to make your move and leave your project in the hands of our experts.

Get a Quote