Home /

NORD Gearbox Replacement Parts

NORD Gearbox Replacement Parts

NORD Gearbox Replacement Parts keep your operation moving without the cost or downtime of full replacement. At Engineered Lifting Systems, we source and supply genuine NORD components so your equipment stays online and productive. Reach out to our team or call 573-646-3996 to get the right match fast. Whether you need a single seal, a brake assembly, or a complete drive unit, we’ll make sure you get the correct NORD Gearbox Replacement Parts for your system at the right price.

What you’ll learn below about NORD parts, replacements, and repair:

  • When part replacement makes more sense than a full gearbox rebuild.
  • The most common NORD components we supply, like gearmotors and brake assemblies.
  • Why genuine OEM NORD parts safeguard performance, warranty coverage, and long-term value.
  • Answers to frequent questions about sourcing NORD replacement parts.
  • Why Engineered Lifting Systems is the go-to partner for NORD gearbox replacements.

Looking for a specific NORD part or trying to keep an existing system online? Contact us online or call 573-646-3996 to speak with a St. Louis, MO, NORD Gearbox Replacement Parts specialist today. Our team at ELS is here to help.

Table of Contents

Engineered Lifting Systems has supported operations across Missouri and the nation for more than 20 years. Learn more about our team or see our recent projects to better understand our capabilities.

When Replacing NORD Gearbox Parts Makes Sense

Not every gearbox issue calls for a full rebuild. Often, targeted part replacement is the fastest and most cost-effective way to get back online. Think of a gearbox like a car’s transmission: it channels raw power into usable motion. Industrial gearboxes do the same job, only at higher loads and duty cycles. Here are common problems solved with new or replacement NORD parts:

  • Leaking seals or gaskets: Oil around the housing usually means a seal issue—not a failed gearbox.
  • Excessive vibration or noise: Worn bearings are often the culprit and can be swapped without opening the entire unit.
  • Localized gear tooth damage: A chipped or stripped gear can often be replaced individually if contamination hasn’t spread.
  • Shaft or coupling wear: Misalignment or overload can damage these parts, but catching it early keeps the fix simple.
  • Motor or brake failure in gearmotor units: The gearbox may be fine—service the motor or brake assembly instead of tearing down the drive.
  • Minor oil contamination: A flush plus fresh seals or bearings can restore performance before a rebuild is necessary.

If the problem can be isolated, all you need is an expert technician and a few OEM NORD replacement parts. For more widespread damage, though, a full rebuild may be the better long-term solution. Reach out to our team or call 573-646-3996 and we’ll help you decide on the best option. Find out more about our role as NORD dealers and Drivesystems distributors based in St. Louis, MO.

NORD Gearbox Part Repair and Replacement - St. Louis, MO

What We Replace

NORD builds a wide range of drive solutions, and every system has wear points that eventually need attention. From full gear units to smaller sub-assemblies, we supply replacements that keep your equipment moving. Common requests include:

NORD Gearboxes

Inline, helical, bevel, and industrial reducers—we match replacements to your exact model so you avoid guesswork or downtime through our gearbox repair and replacement services.

Brake Assemblies

Essential for safety in hoists, conveyors, and processing lines. We provide drop-in replacements or configure new assemblies to your specs with complete brake assembly solutions.

Gearmotors

Integrated units drive everything from mixers to lifting systems. We’ll source the right fit for your setup—or recommend modular options like NORD Flexbloc for flexible replacements.

Reducers and Drive Units

High-torque, high-reliability applications demand precision replacements. We can supply complete assemblies or configure new units to match your system.

Custom Configurations

No two operations are alike. Our St. Louis, MO, technicians work directly with NORD to build custom replacements when needed, and stock NORD Flexbloc parts to support modular systems already in service.

Where NORD Gearbox Parts Are Used

NORD gearboxes and drive units show up in all kinds of heavy-duty applications. Engineers, operators, and maintenance crews rely on the same core components to keep equipment moving safely and efficiently. When a single part fails, having the right replacement on hand is the difference between planned service and unexpected downtime.

  • Material handling: Conveyors, sorters, and automated warehouse systems.
  • Cranes and hoists: Gearboxes and brake assemblies that make lifting safe and controlled, supported by our broader modernization services like structural repairs and capacity upgrades.
  • Food and beverage: Sanitary-ready drives for mixers, packaging lines, and conveyors.
  • Water and wastewater: Gear units powering agitators, pumps, and aerators that run nonstop.

Whatever the industry or use-case, the right NORD Gearbox replacement parts keep your system productive for your team.

Why OEM NORD Parts Matter

OEM stands for Original Equipment Manufacturer. In this case, NORD is the OEM—meaning their gear parts are engineered to the same specifications as the original unit. Using genuine OEM components ensures that every replacement meets NORD’s standards for fit, durability, and performance.

OEM Quality vs. Aftermarket Parts

Industrial gearboxes are precision-built machines. Even small differences in material strength, machining tolerances, or heat treatment can affect how gears, shafts, and seals perform under load. As this OEM vs. aftermarket guide explains, non-genuine parts may look the same but often wear faster and compromise long-term reliability.

Risks of Using Non-OEM Components

  • Fit and compatibility issues: “Almost right” components can cause misalignment, vibration, and premature failure.
  • Shortened service life: Lower-grade bearings, seals, or gears fail more quickly than OEM-spec materials.
  • Warranty concerns: Non-OEM replacements can void manufacturer coverage and reduce available support.
  • Collateral damage: A single inferior part can accelerate wear across the entire gearbox.

Key Takeaways for Reliable NORD Parts

  1. Designed by NORD, built for NORD: OEM parts guarantee exact fit and performance.
  2. Reliability depends on authenticity: Substitutes create unnecessary risks and shorten equipment life.
  3. Cheap fixes cost more later: Cutting corners often leads to expensive downtime and repairs.

As an authorized NORD distributor, Engineered Lifting Systems supplies only genuine OEM parts—ensuring every replacement maintains the integrity of your system.

Frequently Asked Questions About NORD Replacement Parts

Do you stock NORD Gearbox parts in-house?
Yes. We keep common wear items—like seals, bearings, and brake assemblies—on our shelves to minimize downtime. For specialized gear units or less common parts, we work directly with NORD to source and ship quickly.
How fast can you ship a replacement?
Most standard parts ship the same or next business day. Lead times for specialized assemblies depend on NORD’s factory schedule, but we’ll always give you a clear estimate up front so you can plan around it.
What if I don’t know the exact NORD Gearbox part number?
No problem. Share your gearbox model number, photos of the unit, or details about the application, and our team will match the correct replacement for you.
When is it better to rebuild a NORD gearbox instead of replace it?
If multiple components are worn or if contamination has spread throughout the gearbox, a rebuild may restore the unit to like-new condition at a lower cost than full replacement. We provide both options and will walk you through which makes the most sense for your system.
Are NORD OEM parts better than aftermarket?
Yes. Genuine OEM NORD parts are manufactured to the same specifications as the original gearbox or drive unit. Aftermarket substitutes may look similar but often don’t meet the same standards for fit or durability, which can shorten equipment life and increase downtime.
Can NORD replacement parts extend the life of my gearbox?
Absolutely. Replacing worn seals, bearings, or gears with OEM components can restore performance and prevent further damage to the gearbox. In many cases, targeted part replacement adds years of reliable service before a full rebuild or replacement is needed.

Why Engineered Lifting Systems?

For more than 20 years, Engineered Lifting Systems has helped companies across the Midwest keep their operations running. We’re more than a parts supplier—we’re a full service partner for hoists, cranes, drive systems, and the industrial gear that keeps plants moving. When you work with ELS, you get:

  • Direct access to OEM parts: As an authorized NORD distributor, we source the exact replacement you need—fast.
  • Experience that matters: Our technicians and support staff know the equipment inside and out, so you don’t waste time guessing at part numbers or compatibility.
  • Repair and rebuild options: If replacement isn’t the smartest path, we’ll rebuild your gearbox to OEM standards in-house.
  • Downtime-focused service: We understand production schedules. Our goal is always to get you back online as quickly as possible.

In addition to NORD Gearbox Replacement Parts, Engineered Lifting Systems also provides:

Get the Right NORD Gearbox Replacement Parts in St. Louis, MO, Fast

Have questions about replacement parts or gearboxes? Contact us online or call 573-646-3996 to keep your operation running with genuine OEM solutions and expert advice. Whether you need a single seal, a NORD Drivesystem, or a complete assembly, Engineered Lifting Systems makes it simple to get the right parts—fast.

Locations

Swing into action with superior solutions in lifting equipment.

Ready to hit the ground running with a new site or get your current equipment back up and running at maximum capacity as soon as possible? You need a reliable partner for your operation's crane and other overhead lifting system needs: a one-stop shop for everything from design and installation to inspections and repairs.

Reap the benefits of working with one of the top overhead crane technical teams in the world when you work with us. Receive personalized support as we help you find the right products and services for your crane and hoist needs, including jib cranes, bridge cranes, freestanding structures, rope hoists, chain hoists and more. It's time to make your move and leave your project in the hands of our experts.

Get a Quote