Home /

Weidmuller Power Supplies and Relays

Weidmuller Power Supplies and Relays

If you need Weidmuller power supplies and relays in St. Louis, MO, Engineered Lifting Systems can help. We source and ship nationwide, and our technicians support troubleshooting and repair. Contact our team or call 866-756-1200 for more information about Weidmuller power supplies and relays, parts, and repairs.

View Weidmuller Parts
Shop All

Learn more about:

  • What Weidmuller power supplies and relays do
  • Where these parts plug into your workflow
  • Uptime, diagnostics, and safety gains from the right picks
  • Industries that rely on Weidmuller gear
  • Answers to common Weidmuller automation questions

Table of Contents

Why Weidmuller Power Supplies and Relays?

Weidmuller builds rugged automation gear for harsh duty cycles. Their power supplies hold voltage steady through inrush, brownouts, and uneven loads, while their relays provide safe switching, galvanic isolation, and clear status indication.

What that means on your line: clean 24 VDC for the control rail, isolated switching for motors/valves/heaters, and options like buffering, redundancy modules, and DC-OK/status contacts. The right equipment helps reduce trips, gets you better (and faster) diagnostics, and ultimately reduces downtime.

What These Weidmuller Parts Are For

Power supplies power the control system by converting AC into a steady 24 VDC rail for PLCs, I/O, sensors, and HMIs.

Relays handle the switching. They sit between PLC outputs and field devices so the PLC can command motors, valves, and heaters without taking the hit from inrush or electrical noise.

Add buffering or a redundancy module to the power supply, and use relays with correct contact ratings and suppression. You get stable control power and early warnings (DC-OK/status). Contact our team to learn more about Weidmuller power supplies and relays in the Greater St. Louis, MO, area.

Weidmuller Power Supplies and Relays - St. Louis, MO - Weidmuller Parts and Service

Selection & Sizing: Weidmuller Power Supplies and Relays

In any control system, picking parts that fit and do the job right keeps lines steady and service simple. We can help you size power supplies and relays so your equipment runs as expected.

Weidmuller power supplies:

  • Size to the real load and leave ~25–50% headroom for starts and future I/O.
  • Watch panel temperature; derating at higher temps reduces available watts.
  • Add buffering or a redundancy module to ride through dips and avoid a single point of failure.
  • Use DC-OK/status to flag low voltage before a PLC/HMI reboot.

Weidmuller relays:

  • Match contact rating to the job (inductive vs. resistive) and expected inrush.
  • Match coil voltage to the control rail (e.g., 24 VDC), and add suppression (diode or snubber) to reduce chatter and arcing.
  • Pick the SPDT/DPDT contact configuration you need, and use pluggable bases on DIN rails and mounting systems with test points for fast swap-outs.

Not sure what Weidmuller power supplies and relay systems you need? Contact our team or call 866-756-1200 and we’ll size the right mix for your panel and environment.

Who Uses Weidmuller Relay Parts and Power Supplies?

Maintenance teams, electricians, and controls engineers use Weidmuller power supplies and relays when uptime matters and panels take abuse—in factory automation, heavy industry, utilities, and more.

Key industries that count on Weidmuller power supplies and relays include:

  • 3PL & Warehousing
  • Packaging & Production Lines
  • Automotive & Robotics
  • Food & Beverage
  • Steel & Heavy Industry
  • Building Infrastructure
  • Utilities & Water
  • Elevator & Escalator
  • Pharma & Life Sciences
  • General MRO Services

Across these sectors, the goals are the same—steady lines and quick diagnostics. Weidmuller power supplies keep the 24 VDC rail clean with headroom, redundancy, or buffering. Weidmuller relays bring matched contacts, the right coil voltage, suppression, and pluggable bases for fast service. That means clearer faults, fewer nuisance trips, and steadier panels.

Contact our team to spec Weidmuller power supplies and relays for your load, environment, and required certifications. Read more about the projects we’ve completed for customers over the years.

Why Engineered Lifting Systems?

Engineered Lifting Systems isn’t just a parts supplier—we keep your operation online. For more than 20 years, we’ve helped plant engineers, maintenance leads, and project managers solve problems fast with genuine OEM parts and real-world support.

  • Authorized Weidmuller distributor: Direct access to OEM power supplies, relays, and accessories.
  • Fast sourcing and shipping: We pull common SKUs from stock and cross hard-to-find numbers quickly.
  • Sizing and crossing help: We match units to your load, environment, and required certifications.
  • Field-tested service: Troubleshooting, repair, and retrofit support from techs who work in real plants.
  • Documentation ready: Datasheets, UL/CE/CSA listings, and spec packets for your records.

Have questions before you buy? Check the FAQ below. Ready to move? Contact our team or call 866-756-1200.

Frequently Asked Questions

Quick answers on sizing, coil choices, approvals, stock, and ship times for Weidmuller power supplies and relays.

How much headroom should I spec on a power supply?
Plan for 25–50% over your calculated load and check thermal derating for your ambient temperature. If you see dips during starts or brownouts, consider buffering or redundancy and use DC-OK/status contacts for early warning.
Which relay should I use for motors, solenoids, or heaters?
Match the contact rating to the load type (inductive vs. resistive), pick the correct coil voltage for your control rail (e.g., 24 VDC), and add suppression (LED/diode or RC) to reduce chatter and arcing. Interposing relays also protect PLC outputs.
Can you provide documentation and approvals?
Yes. We can provide datasheets, UL/CE/CSA listings, IP ratings, temperature/derating curves, wiring diagrams, 2D/3D drawings, and cross-references for Weidmuller power supplies and relays. Tell us the part number—or the application—and we’ll pull the right docs.
Do you stock Weidmuller power supplies and relays?
We keep fast-moving SKUs on the shelf and source others quickly through our Weidmuller channels. Tell us your load, environment, and required certifications, and we’ll pull or cross the right unit.
What approvals and ratings should I look for?
Look for UL/CE/CSA listings, IP rating, operating temperature, and any site-specific needs (e.g., Class/Division, marine, food). We can provide datasheets and documentation with your quote.
Why do my PLCs or HMIs reboot randomly?
Usually low voltage on the 24 VDC rail from inrush or brownouts. Upsize the PSU with headroom, add buffering or redundancy, and wire DC-OK/status to flag issues before a reboot happens.
Why do my relays chatter or fail early?
Common causes are mismatched coil voltage, lack of suppression, or contacts undersized for inductive loads. We’ll spec the right coil, add suppression, and pick contact curves that handle your duty cycle.
How fast can you ship replacements?
Stock items usually ship same day or next day. Non-stock items depend on factory availability—we’ll quote realistic lead times up front so you can plan around them.

Work With Authorized Weidmuller Distributors

With ELS, you get:

  • Direct access to OEM parts: As an authorized Weidmuller distributor, we pull or cross the exact unit you need ASAP.
  • Experienced technicians: Our team specs gear for real plant conditions, not just data sheets.
  • Repair and rebuild: When replacement isn’t the best move, we troubleshoot and retrofit to OEM standards.
  • Downtime-focused service: We prioritize uptime and keep production on schedule.

ELS also supports:

Weidmuller Power Supplies & Relays in St. Louis

We provide Weidmuller power supplies and relays for clean control power and safe, isolated switching—speeding diagnostics and improving efficiency. If uptime is critical, contact our team online or call 866-756-1200. We’ll match the right units to your load, environment, and approvals for St. Louis Weidmuller power supplies and relays.

Weidmuller Parts


Locations

Swing into action with superior solutions in lifting equipment.

Ready to hit the ground running with a new site or get your current equipment back up and running at maximum capacity as soon as possible? You need a reliable partner for your operation's crane and other overhead lifting system needs: a one-stop shop for everything from design and installation to inspections and repairs.

Reap the benefits of working with one of the top overhead crane technical teams in the world when you work with us. Receive personalized support as we help you find the right products and services for your crane and hoist needs, including jib cranes, bridge cranes, freestanding structures, rope hoists, chain hoists and more. It's time to make your move and leave your project in the hands of our experts.

Get a Quote