|
|
Mondel Brakes
Overhead Crane Brakes &
Industrial Brakes by Magnetek |
| |
|
|
One of the most important
crane modernization, retrofit or repair considerations is
the replacement of outdated or unserviceable crane brakes
with current industrial braking technology.
Engineered Lifting Systems offers expert analysis and
recommendations for your crane modernization and Mondel
Industrial Brakes are our preferred choice for improving
crane performance, safety and reducing maintenance and crane
down time. Read more about these excellent products
and
contact Engineered Lifting
for assistance. |
| |
|
|
Thruster
Brakes by Mondel
Mondel Hy-Thrust Actuators
combine all the basic elements of a hydraulic system
into one integral unit, the function of these actuators is
to convert electrical energy, hydraulically, into a
mechanical force, producing a straight line thrust
throughout the piston stroke.
|
 |
These thruster brake actuators are
electro-hydraulic devices which combine all the basic
elements of a hydraulic system into one integral unit,
consisting of: an electric motor driving a hydraulic pump,
piping, working cylinder and piston.
There are three
families of Mondel Thruster Brakes:
- AC Industrial Type
"Ed"
- AC Explosionproof Type
"EdF"
- DC Industrial Type
"Eg"
Standard Features:
- Fast response - 2000
cycles per hour
- Long service life with
minimum maintenance
- Bi-directional
operation
- Extending forces from
50 lbs. to 770 lbs.
- Strokes from 2" to
7.8"
- Operating ambient
temperature: -25 Deg. C to +50 Deg. with standard fluid
(other ranges available on request) V DC (Ed50/6
upwards)
Options:
- Internal compression
spring
- Externally adjustable,
stepless time delays - both directions (S) (H)
- Damping spring (D)
- Vacuum poured stator
windings
- Tropical and corrosion
protection
- Internal pipe heaters
for below -30 Deg. C ambient (110V or 220V)
- Flameproof models
available (EdF30/6 upwards)
- Continuously rated
(S1) Intermittent rated (S3) Service < 40 Deg. C
- Class F insulation
- AC Supplies (Type Ed):
230V-460V-575V/3Ph/50-60Hz
- DC Supplies (Type Eg):
230V DC and 440
|
|
Mondel
Industrial Disc Brakes
Mondel
Type 400D severe duty range industrial disc brakes are
specifically designed for high-speed, high-performance
applications. They are manufactured from materials selected
to optimize performance and serviceability for the most
demanding applications. |
 |
Mondel's
advanced design features, combined with heavy duty steel
construction and superior components, make this range of
brakes your best choice for applications requiring optimal
performance, reliability and durability. Plus, Mondel Disc
Brakes are designed to be easy to service and maintain. Need
a customized braking system for your application? Mondel
Disc Brakes can be customized to meet your specific needs.
Use our 400D as a drop-in replacement for your existing disc
brakes or, with modifications, as a replacement for your
existing drum brakes in high duty cycle, high speed or high
torque stopping applications.
The Mondel 400D range of disc brakes are available in
three types:
- Type SDT - conform to
container industry ratings and dimensions
- Type ADT - conform to
AISE ratings and dimensions
- Type NDT - conform to
Wagner dimensions
- External
Torque Spring:
Allows user to fine tune braking torque per application
- Auto-Adjust:
Compensates for lining wear automatically
-
Auto-Equalization:
Insures equal shoe clearance at all times
- Steel-back
Anti-friction Bronze Bushings:
Installed at all main pivot points; reduces maintenance
and enhances brake performance
- Stainless
steel pivot pins:
Non-corrosive—low maintenance
- Hy-Thrust
Actuator:
High performance, high duty cycle, waterproof thruster
- Easily
replaceable brake shoes:
Accessible brake shoe mounting hardware reduces
maintenance time
- Non-asbestos
brake linings
- CSA Approved
- Time Delay on "Set"
and "Release"
- Manual latching hand
release
- Limit Switches for
release proving
- Braketronic™
Controller
- Nitride Corrosion
Protection
- Dual disk brake
mounting plate
- Marine Port
Terminals
- Steel Mills
- Ship Loaders
- Port Cranes
- Shipyard Cranes
- Offshore Drilling
Rigs
- Large Gantry
Cranes
- Swing Span Bridges
- Bascule Bridges
- Vertical Lift
Bridges
Accessories
-
Discs—Standard/Ventilated
- Discs/Hubs (Rigid)
- Discs/Couplings
(Flexible)
|
|
AISE-NEMA Mill Duty Shoe Brakes (300M)
Mondel
AISE-NEMA rated
mill duty brakes are designed for heavy duty steel mill and
other arduous environments, which require high integrity
products with a minimum of maintenance and downtime. |
 |
Mondel's mill duty shoe brakes
advanced design features, combined with fabricated steel
construction, makes this range of brakes suitable for
applications requiring reliable braking with the minimum of
maintenance and downtime, including: Steel Mills, Stacker
Reclaimers, Shiploaders, Port Cranes, Shipyard Cranes,
Offshore Drilling Rigs, Missile Assembly Cranes, Incinerator
Cranes, Large Gorillas etc.
Specifications
TYPE "MBE" - DC MAGNET
Note
that these brakes are a direct replacement for P & H SBE
Brakes
Spring applied, electrically
released
- Replaceable magnet
coils
- Class F insulation
- Shunt: 12V through
550V DC
- Series: 10A through
800A (40% - 10% FLC)
- Auto-adjuster for
lining wear
- Forcing rectifier
(Fast response for crane hoists, etc.)
- Constant potential
rectifiers (For crane bridges/trolleys)
- Terminal box
rectifiers
TYPE "MBT" - 3 PH. AC AND DC
- Fast response -
standard units < 2000 cycles per hour
- Spring applied,
electrically released
- Continuously or
Intermittent rated , Service < 40 Deg. C
- Class F insulation
- AC Supplies:
230-460-575/3Ph/50-60 Hz
- DC Supplies: 230V and
440V DC
- Auto-adjustor for
lining wear
- External torque spring
with calibrated indicator
- Externally adjustable,
stepless time delays - both directions (set and release)
- Braketronic Controller
- Hydraulically applied,
spring release
- Pedal operation - One
(1) or Two (2) Brakes
Types "MBE" and "MST" - Electric - Hydraulic operated
Both types can be fitted
with Pedal or Power assisted hydraulic over-ride to
produce a dual-purpose brake. This hybrid brake is
useful for EOT bridges, Gantry cranes and similar
applications where dual control and/or emergency
stopping and parking are required.
|
| |
|
|
Mondel
Industrial Shoe Brakes (200S)
Mondel Hi-Tork 200S range of
industrial shoe brakes are suitable for a variety of
industrial and mining applications which require reliable
stopping and holding.
|
 |
|
Mondel Hi-Tork 200S
range of industrial shoe brakes are suitable for a
variety of industrial and mining applications and
environments including cranes, conveyors, moving
bridges, fans, winches, turn-tables, overhead doors,
lock gates, strip processing equipment, shiploaders, ore
bridges, deck machinery, machine tools and many other
types of machinery which require reliable stopping and
holding.
The 200S range is very
flexible and consists of a basic movement which can be
fitted with a variety of DC, AC, hydraulic, pneumatic
and mechanical operators. The many optional features
make the basic brakes suitable for a large number of
different applications.
The main components of the
movement are manufactured from cast steel, fabrications
and close grained cast iron. The brake arms, shoes and
several other components are standardized, jig drilled,
and interchangeable between different brake types of the
same diameter.
Specifications
- Spring applied,
electrically released
- Magnet coils
encapsulated in epoxy resin
- Class F insulation
- Shunt: 12V through
550V DC
- Series: 10A
through 400A (40% - 10% FLC)
- Forcing rectifiers
(Fast response for crane hoists, etc.)
- Constant potential
rectifiers (For crane bridges, trolleys, etc.)
- Terminal box
rectifiers
TYPE "MST" - 3 PH. AC
AND DC
- Fast response -
standard units 2000 cycles per hour
- Spring applied,
electrically released
- Continuously rated
or Intermittent, Service < 40 Deg. C
- Class F insulation
- AC Supplies:
230-460-575/3Ph/50-60 Hz
- DC Supplies: 230V
and 440V DC
- External torque
Spring with calibrated indicator
- Externally
adjustable, stepless time delays-both directions
(set and release)
- Hydraulically
applied by short stroke cylinder, spring release
- Pedal operation -
One (1) or Two (2) Brakes
Types "MSA" and "MST"
- Electric-Hydraulic Operated
Both types can be
fitted with assisted hydraulic over-ride to produce
a dual-purpose brake. This hybrid brake is useful
for EOT bridges, Gantry cranes and similar
application where dual control and/or emergency
stopping and parking are required.
|
| |
|
|
Please
contact Engineered Lifting
for applications assistance with
Mondel brake products. |
|
Top |
|
